Bedienungsanleitung Makita BMR103 (Seite 7 von 21) (Englisch, Holländisch)

598583

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

The following tables indicate the operating time on a single charge in Radio mode/iPod iPhone mode.

Note: Table regarding to the battery operating time above is for reference. The actual operating time may differ with the

type of the battery and the model of iPod/iPhone in use.

: Cluster Battery

: Slide Battery

3-1. Installing or removing Slide battery cartridge (Fig. 4)

• To install the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Always insert it all the way until it locks in

place with a little click.

• If you can see the red indicator on the upper side of the

button, it is not locked completely. Install it fully until the

red indicator cannot be seen. If not, it may accidentally

fall out of the tool, causing injury to you or someone

around you.

• Do not use force when inserting the battery cartridge. If

the cartridge does not slide in easily, it is not being

inserted correctly.

• To remove the battery cartridge, withdraw it from the

tool while sliding the button on the front of the cartridge

or pressing the buttons on both sides of the cartridge.

3-2. Installing or removing Cluster battery cartridge

(Fig. 5 - 9)

• Pull the supporting bar to allow the battery to insert to

the terminal.

• To insert the battery cartridge, align the tongue on the

battery cartridge with the grove in the housing and slip

it into place.

• Release the supporting bar.

• To remove the battery cartridge, pull the supporting bar

and take the battery out of the terminal.

4. Return the battery compartment locker to the original

position.

5. Reduced power, distortion and a “stuttering sound” or

low battery sign that appears on the display are

all the signs that the main battery pack needs to

replace.

Note:

The battery pack can’t be charged via the supplied AC

power adaptor.

6. When low battery sign appears and an “E” keeps

on flashing is the time to replace the back up batteries.

Battery Cartridge Voltage

AT SPEAKER OUTPUT =

50 mW + 50 mW

unit: Hour

7.2 V 9.6 V 10.8 V 12 V 14.4 V 18 V

In Radio or

AUX

In iPod

mode

In iPhone

mode

BL7010

APPROX.

5.5

APPROX.

4.0

APPROX.

2.0

PA09 PA12 PA14 PA18

APPROX.

7.0

APPROX.

6.0

APPROX.

3.0

9050 1250 1450 1850

9100 1200 1420

BL1815

9120 BL1013 1220

BL1415

9100A 1200A

9102 1202 1422 1822

APPROX.

11.0

APPROX.

10.0

APPROX.

6.0

9122 1222 BH1420

9102A 1202A

BH9020 BH1220

BH9020A BH1200C

9134 1234 1434 1834

APPROX.

14.0

APPROX.

13.0

APPROX.

9.0

BH1427

APPROX.

15.0

APPROX.

13.5

APPROX.

10.0

9135 1235 1435 1835

APPROX.

16.5

APPROX.

15.0

APPROX.

11.0

1435F

BL1830

1235F

BL1430

BH9033 BH1233 BH1433

APPROX.

18.0

APPROX.

16.5

APPROX.

12.0

BH9033A BH1233C

WARNING:

Do not use two main batteries at the same time.

WARNING:

Do not use two main batteries at the same time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita BMR103 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita BMR103

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info