Bedienungsanleitung Makita BMR103 (Seite 9 von 124) (Alle Sprachen)

598583

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

FM stereo (auto)/mono

If the FM radio station being listened to has a weak signal

some hiss may be audible. It is possible to reduce this

hiss by forcing the radio to play the station in mono rather

than stereo.

1. Press the Source button as needed to select the

FM band and tune to the desired FM station as

previously stated.

2. Press and hold Menu/Info button to enter the

menu setting.

3. Rotate the Tuning control until the FM Auto/mono

setting shows on the display. If the setting is Auto

press the Tuning control to switch to Mono mode to

reduce the hiss. Press the Tuning control to select the

option.

Recalling a preset in AM/FM mode

1. Press the Power button to switch on your radio.

2. Press the Source button to select AM or FM radio

mode.

3. Momentarily press the required Preset button

to cause your radio to tune to one of

the stations stored in the preset memory.

iPod docking

Your radio has an iPod docking facility which allows you

to play digital audio files and soundtracks held on your

iPod/iPhone directly.

Your radio uses the iPod Universal Dock adjustor

developed for use with iPods and iPhone. Recent models

of iPod/iPhone are supplied with Universal Dock Adapter

inserts which ensure correct alignment of the iPod/iPhone

with the electrical connector.

Important:

The radio does not support iPod 3rd generation (build

2003-2004). To avoid possible damage to your iPod,

do not use your iPod with the product without the

correct adapter fitted to the radio.

Note:

1) All the model listed in the following can be connected

to your radio, but not for iPod shuffle: (1) iPhone 4S

(2) iPhone 4 (3) iPhone 3GS (4) iPod touch 4G

(5) iPod touch 3G (6) iPod nano 6G (7) iPod nano 5G

(8) iPod classic

2) Models listed above have been certified by the

developer to meet Apple performance standards. The

models which are not listed above can also operate

with your BMR103; however, there is no certification

to meet Apple performance standards.

Charging your iPod/iPhone

1. Place the iPod/iPhone onto the Universal Dock

Adjuster into the iPod docking compartment. Press the

Power button to switch on your radio.

2. Press Source button until “iPod” shows on the

display. If you see (battery with thunder) on your iPod

screen, it indicates your radio is charging your iPod’s/

iPhone’s internal battery.

Note:

1) AM does not operate while charging your iPod/iPhone.

2) When the radio is plugged with AC adapter, your iPod/

iPhone can be charged regardless of power on/off of

the iPod/iPhone itself or the radio.

3) When the battery is used as power supply, your iPod/

iPhone can only be charged when the radio is power

on.

Navigating your iPod/iPhone

To navigate your iPod/iPhone menus to make selections

or to change settings, you should use your iPod/iPhone

controls. The radio controls can be used for Menu/Select,

Previous/Next, Fast Rewind/Fast Forward and Play/

Pause functions.

1. Use the Menu/Info button to navigate to higher

level menus on your iPod/iPhone.

2. Rotate the Tuning control as required to move up

or down a menu screen on your iPod/iPhone.

3. Press the Tuning control to select the highlighted

option on your screen menu.

Note:

If this item is a lower level menu item, you may then

navigate further by pressing the Tuning control.

Playing an audio file on your iPod/

iPhone

1. When you have found the desired item, press the

Tuning control on the radio to start the iPod

playing.

2. Adjust the volume to the required setting using the

Tuning control on your radio.

• To adjust the volume, you need to make sure the

word “iPod” on the screen is not flashing.

• Press the preset button (1-5) at any point If you

want to cease the word “iPod” from flashing.

3. To pause playback press the Play/Pause button

. To resume playback press the Play/Pause

button again.

4. iPods do not have a Stop button (they use the Pause

function). To play an alternative selection, use the

iPod menus to make the selection using the Play/

Pause button to stop playing the current

item if needed.

5. If it was previously playing, your iPod/iPhone will

switch on and continue playing from where it was

previously stopped.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita BMR103 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita BMR103

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info