Bedienungsanleitung Makita BO 4901 (Seite 5 von 40) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

600717

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

ENGLISH

Explanation of general view

1 Clamp lever

2 Conventional type of abrasive

paper with pre-punched holes

3Pad

4 Punch plate

5 Conventional type of abrasive

paper without pre-punched

holes

6 Hook-and-loop type of

abrasive paper with

pre-punched holes

7 Pad for hook-and-loop type of

abrasive paper

8 Screws

9 Screwdriver

10 Groove

11 Front fixing cardboard

12 Paper dust bag

13 Claws

14 Upper part

15 Notch

16 Guide

17 Speed adjusting dial

18 Lock button

19 Switch trigger

SPECIFICATIONS

Model BO4900V BO4900 BO4901

Pad size ......................................................... 115 mm x 229 mm 115 mm x 229 mm 115 mm x 229 mm

Abrasive paper size ....................................... 115 mm x 280 mm 115 mm x 280 mm 115 mm x 280 mm

Orbits per minute (min

–1

)................................ 4,000 – 10,000 10,000 10,000

Sanding stroke rate (min

–1

) ............................ 8,000 – 20,000 20,000 20,000

Overall length ................................................ 289 mm 289 mm 289 mm

Net weight ...................................................... 2.8kg 2.8kg 2.8kg

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Intended use

The tool is intended for the sanding of large surface of

wood, plastics and metal materials as well as painted

surfaces.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

Safety hints

For your own safety, please refer to the enclosed safety

instructions.

ADDITIONAL SAFETY RULES

ENB042-3

1. Hold the tool firmly.

2. Do not leave the tool running. Operate the tool

only when hand-held.

3. This tool has not been waterproofed, so do not

use water on the workpiece surface.

4. Ventilate your work area adequately when you

perform sanding operations.

5. Some material contains chemicals which may be

toxic. Take caution to prevent working dust inha-

lation and skin contact. Follow material supplier

safety data.

6. Always use the correct dust mask/respirator for

the material and application you are working

with.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Installing or removing abrasive paper

CAUTION:

Always be sure that the tool is switched off and

unplugged before installing or removing the abrasive

paper.

For conventional type of abrasive paper with pre-

punched holes (standard equipment):

Turn the clamp lever counterclockwise. Insert the paper

end into the clamper, aligning the holes in the paper with

those in the pad. Then return the clamp lever to the origi-

nal position to secure the paper. Repeat the same pro-

cess for the other end of the tool, maintaining the proper

paper tension. (Fig. 1)

For conventional type of abrasive paper without pre-

punched holes (optional accessory):

Turn the clamp lever counterclockwise. Insert the paper

end into the clamper, aligning the paper edges even and

parallel with the sides of the base. Then return the clamp

lever to the original position to secure the paper. Repeat

the same process for the other end of the tool, maintain-

ing the proper paper tension. Place the punch plate

(optional accessory) over the paper so that the guide of

the punch plate is flush with the sides of the pad. Then

press the punch plate to make holes in the paper.

(Fig. 2)

For hook-and-loop type of abrasive paper with pre-

punched holes (optional accessory):

Remove all dirt or foreign matter from the pad. Attach the

paper to the pad, aligning the holes in the paper with

those in the pad. (Fig. 3)

CAUTION:

Never use pressure-sensitive abrasive paper.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita BO 4901 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info