Bedienungsanleitung Makita BO5030K (Seite 4 von 32) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch)

711197

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

ENGLISH (Original instructions)

Explanation of general view

1 Switch

2 Speed adjusting dial

3 Orbits per minute

4 Dial setting

5 Dust bag

6 Dust nozzle

7Groove

8 Front fixing cardboard

9 Front side of paper dust bag

10 Claws

11 Upper part

12 Notch

13 Guide

14 Holding tab

15 Dust box

16 Latch

SPECIFICATIONS

Model BO5030 BO5031

Paper size .......................................................125 mm 125 mm

Orbits per minute (min

–1

) ................................12,000 4,000 – 12,000

Dimensions (L x W x H) ..................................153 mm x 123 mm x 153 mm 153 mm x 123 mm x 153 mm

Net weight ......................................................1.3 kg 1.3 kg

Safety class..................................................... /II /II

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2014

ENE052-1

Intended use

The tool is intended for the sanding of large surface of

wood, plastics and metal materials as well as painted

surfaces.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

GEA010-2

General power tool safety warnings

WARNING: Read all safety warnings, instruc-

tions, illustrations and specifications provided with

this power tool. Failure to follow all instructions listed

below may result in electric shock, fire and/or serious

injury.

Save all warnings and instructions for future refer-

ence.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

GEB021-4

SANDER SAFETY WARNINGS

1. Always use safety glasses or goggles. Ordinary

eye or sun glasses are NOT safety glasses.

2. Hold the tool firmly.

3. Do not leave the tool running. Operate the tool

only when hand-held.

4. This tool has not been waterproofed, so do not

use water on the workpiece surface.

5. Ventilate your work area adequately when you

perform sanding operations.

6. Some material contains chemicals which may be

toxic. Take caution to prevent working dust inha-

lation and skin contact. Follow material supplier

safety data.

7. Use of this tool to sand some products, paints

and wood could expose user to dust containing

hazardous substances. Use appropriate respira-

tory protection.

8. Be sure that there are no cracks or breakage on

the pad before use. Cracks or breakage may

cause a personal injury.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this instruc-

tion manual may cause serious personal injury.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Switch action (Fig. 1)

CAUTION:

• Before plugging in the tool, always be sure that the tool

is switched off.

To start the tool, press the “I (ON)” side of the switch. To

stop, press the “O (OFF)” side of the switch.

Speed adjusting dial (Fig. 2 & 3)

For Model BO5031

The tool speed can be infinitely adjusted between 4,000

and 12,000 orbit per minute by turning the speed adjust-

ing dial. Higher speed is obtained when the dial is turned

in the direction of number 5; lower speed is obtained

when it is turned in the direction of number 1.

Refer to the figure for the relationship between the num-

ber settings on the adjusting dial and the kind of work.

A range: For polishing

B range: For finish sanding

C range: For regular sanding

NOTE:

• Fig. 3 shows standard applications. They may differ

under certain conditions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita BO5030K Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info