Bedienungsanleitung Makita BTD120 (Seite 4 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

598608

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ENGLISH

Explanation of general view

1 Red part

2 Button

3 Battery cartridge

4 Terminal cover

5 Charging lights

6 Battery charger

7 Bit

8 Sleeve

9 Switch trigger

10 Reversing switch lever

11 A side

12 B side

13 Clockwise

14 Counterclockwise

15 N

m (kgf

cm)

16 Fastening torque

17 Proper fastening torque for

18 Seconds

19 Fastening time

20 Limit mark

21 Brush holder cap

22 Screwdriver

SPECIFICATIONS

Model BTD120

Capacities

Machine screw ................................. 4 mm–8mm

Standard bolt .................................. 5 mm – 12 mm

High tensile bolt ............................. 5 mm – 10 mm

No load speed (min

–1

) ............................... 0 – 2,300

Impacts per minute .................................... 0 – 3,000

Overall length ............................................... 168 mm

Net weight ....................................................... 1.5 kg

Rated voltage ............................................ D.C. 12 V

•

Due to our continuing program of research and

development, the specifications herein are subject

to change without notice.

•

Note: Specifications may differ from country to

country.

Safety hints

For your own safety, please refer to the enclosed

safety instructions.

IMPORTANT SAFETY INSTRUCTIONS

FOR CHARGER & BATTERY CARTRIDGE

ENC002-3

1. SAVE THESE INSTRUCTIONS — This manual

contains important safety and operating

instructions for battery charger.

2. Before using battery charger, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using

battery.

3. CAUTION — To reduce risk of injury, charge

only MAKITA type rechargeable batteries.

Other types of batteries may burst causing

personal injury and damage.

4. Do not expose charger to rain or snow.

5. Use of an attachment not recommended or

sold by the battery charger manufacturer may

result in a risk of fire, electric shock, or injury

to persons.

6. To reduce risk of damage to electric plug and

cord, pull by plug rather than cord when dis-

connecting charger.

7. Make sure cord is located so that it will not be

stepped on, tripped over, or otherwise sub-

jected to damage or stress.

8. Do not operate charger with damaged cord or

plug — replace them immediately.

9. Do not operate charger if it has received a

sharp blow, been dropped, or otherwise dam-

aged in any way; take it to a qualified service-

man.

10. Do not disassemble charger or battery car-

tridge; take it to a qualified serviceman when

service or repair is required. Incorrect reas-

sembly may result in a risk of electric shock or

fire.

11. To reduce risk of electric shock, unplug

charger from outlet before attempting any

maintenance or cleaning. Turning off controls

will not reduce this risk.

12. The battery charger is not intended for use by

young children or infirm persons without

supervision.

13. Young children should be supervised to

ensure that they do not play with the battery

charger.

14. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

15. If electrolyte gets into your eyes, rinse them

out with clear water and seek medical atten-

tion right away. It may result in loss of your

eyesight.

ADDITIONAL SAFETY RULES FOR

CHARGER & BATTERY CARTRIDGE

1. Do not charge battery cartridge when tempera-

ture is BELOW 10°C (50°F) or ABOVE 40°C

(104°F).

2. Do not attempt to use a step-up transformer,

an engine generator or DC power receptacle.

3. Do not allow anything to cover or clog the

charger vents.

4. Do not short the battery cartridge:

(1) Do not touch the terminals with any con-

ductive material.

(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a break-

down.

BTD120 (E) (’100. 11. 27)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita BTD120 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info