Bedienungsanleitung Makita btl060rf (Seite 7 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

381537

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

OPERATION (Fig. 14 & 15)

The proper fastening torque may differ depending upon

the kind or size of the screw/bolt, the material of the

workpiece to be fastened, etc. Before starting your job,

always perform a test operation to determine the proper

fastening time for your screw. (Fig. 16)

NOTE:

• Use the proper bit for the head of the screw/bolt

OPERATION that you wish to use.

• Hold the tool pointed straight at the screw.

• If the tool is operated continuously until the battery

cartridge has discharged, allow the tool to rest for

15 minutes before proceeding with a fresh battery.

The fastening torque is affected by a wide variety of

factors including the following. After fastening, always

check the torque with a torque wrench.

1. When the battery cartridge is discharged almost

completely, voltage will drop and the fastening torque

will be reduced.

2. Driver bit or socket bit

Failure to use the correct size driver bit or socket bit

will cause a reduction in the fastening torque.

3. Bolt

• Even though the torque coefficient and the class of

bolt are the same, the proper fastening torque will

differ according to the diameter of bolt.

• Even though the diameters of bolts are the same,

the proper fastening torque will differ according to

the torque coefficient, the class of bolt and the bolt

length.

4. The manner of holding the tool or the material of

driving position to be fastened will affect the torque.

5. Operating the tool at low speed will cause a reduction

in the fastening torque.

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before attempting to

perform inspection or maintenance.

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be

performed by Makita Authorized Service Centers, always

using Makita replacement parts.

ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• Phillips bit

• Bit piece

• Straight head

• Ratchet head

• Socket

• Socket adapter

• Various type of Makita genuine batteries and chargers

For Model BTL060

ENG102-1

For European countries only

Noise

The typical A-weighted noise level determined according

to 60745-2-2:

Sound pressure level (L

): 91 dB (A)

Sound power level (L

): 102 dB (A)

Uncertainty (K): 3 dB (A)

Wear ear protection

Vibration

ENG205-1

The vibration total value (tri-axial vector sum) determined

according to EN60745-2-2:

Work mode : impact tightening of fasteners of the

maximum capacity of the tool

Vibration emission (a

): 9 m/s

Uncertainty (K): 1.5 m/s

For Model BTL061 ENG102-1

For European countries only

Noise

The typical A-weighted noise level determined according

to 60745-2-2:

Sound pressure level (L

): 90 dB (A)

Sound power level (L

): 101 dB (A)

Uncertainty (K): 3 dB (A)

Wear ear protection

Vibration

ENG205-1

The vibration total value (tri-axial vector sum) determined

according to EN60745-2-2:

Work mode : impact tightening of fasteners of the

maximum capacity of the tool

Vibration emission (a

): 11 m/s

Uncertainty (K): 1.5 m/s

EC-DECLARATION OF CONFORMITY

Model; BTL060, BTL061

ENH102-6

We declare under our sole responsibility that this product

is in compliance with the following standards of

standardized documents;

EN60745, EN55014 in accordance with Council

Directives, 2004/108/EC, 98/37/EC.

CE 2006

Tomoyasu Kato

Director

Responsible Manufacturer:

Makita Corporation

3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN

Authorized Representative in Europe:

Makita International Europe Ltd.

Michigan Drive, Tongwell, Milton Keynes, Bucks MK15

8JD, ENGLAND

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita btl060rf Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info