Bedienungsanleitung Makita BTW104 (Seite 7 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

600713

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

• Overloaded:

The tool is operated in a manner that causes it to

draw an abnormally high current.

In this situation, release the switch trigger on the tool

and stop the application that caused the tool to

become overloaded. Then pull the switch trigger

again to restart.

If the tool does not start, the battery is overheated. In

this situation, let the battery cool before pulling the

switch trigger again.

NOTE:

• The overheat protection works only with BL1415NA.

Switch action (Fig. 2)

CAUTION:

• Before inserting the battery cartridge into the tool,

always check to see that the switch trigger actuates

properly and returns to the “OFF” position when

released.

To start the tool, simply pull the switch trigger. Tool speed

is increased by increasing pressure on the switch trigger.

Release the switch trigger to stop.

Reversing switch action (Fig. 3)

CAUTION:

• Always check the direction of rotation before operation.

• Use the reversing switch only after the tool comes to a

complete stop. Changing the direction of rotation

before the tool stops may damage the tool.

• When not operating the tool, always set the reversing

switch lever to the neutral position.

This tool has a reversing switch to change the direction

of rotation. Depress the reversing switch lever from the A

side for clockwise rotation or from the B side for counter-

clockwise rotation.

When the reversing switch lever is in the neutral position,

the switch trigger cannot be pulled.

Turning on the lamp (Fig. 4)

CAUTION:

• Do not look in the light or see the source of light

directly.

Pull the switch trigger to light up the lamp. The lamp

keeps on lighting while the switch trigger is being pulled.

The light automatically goes out 10 seconds after the

switch trigger is released.

NOTE:

• Use a dry cloth to wipe the dirt off the lens of lamp. Be

careful not to scratch the lens of lamp, or it may lower

the illumination.

Auto-Stop setting for number of impacts

This tool has a convenient auto-stop mechanism that

allows you to preset the desired number of impacts in

terms of the application. The tool then stops automati-

cally after reaching the preset number of impacts.

Setting for number of impacts (Fig. 5)

1. Pull the switch trigger, and then release it.

2. Pull the switch trigger approximately 3 seconds

while pressing the indication button, and then

release the switch trigger and the indication button.

3. The lamp on the left side of the display blinks so that

the number of first digit can be changed by pressing

the button.

4. Press the button and choose the desired number.

The displayed number changes fast by keeping

pressing the button. To set the first digit, pull the

switch trigger and then release it.

5. The lamp on the right side of the display starts to

blink so that the number of second digit can be

changed.

6. Press the button and choose the desired number.

The displayed number changes fast by keeping

pressing the button. To set the second digit, pull the

switch trigger and then release it.

7. For the final setting, pull the switch trigger while

pressing the indication button. The number of

impacts is set at once.

To reconfigure the number of impacts, pull the trig-

ger without pressing the indication button so that

return to 3 above.

Confirming the current setting number

To check the current setting number, pull the trigger

once, release it and then press the indication button.

Relation between presetting number and action

003611

NOTE:

• Use presetting number as a guideline. To keep the fas-

tening torque, number of impacts changes automati-

cally by remaining battery capacity.

Indicating lamp (Fig. 6)

• After impacting preset numbers, the indicating lamp

lights in green color.

• The red color light will light on if the trigger is released

before the presetting number of impacts is achieved. It

indicates that the operation is incomplete.

• When auto-stop mechanism is working, the indicating

lamp lights red while the switch trigger is being pulled.

Presetting

number

Clockwise rotation

Counterclockwise

rotation

Auto-stop setting

does not work.

Auto-stop setting

does not work.

01–99

After impacting [num-

ber of impacts (pre-

setting number x 2) x

0.02] seconds.

Green color lamp

lights on.

Switch off before

impacting [number of

impacts (presetting

number x 2) x 0.02]

seconds.

Red color lamp lights

on.

Then, the lamp goes

out.

Auto-stop setting

does not work.

Indication lamp goes

out.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita BTW104 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info