Bedienungsanleitung Makita BUC121 (Seite 11 von 84) (Deutsch, Englisch)

476839

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

• Do not use force when inserting the battery

cartridge. If the cartridge does not slide in easily, it

is not being inserted correctly.

Switch action

CAUTION:

• Before inserting the battery cartridge into the tool,

always check to see that the switch trigger

actuates properly and returns to the "OFF" position

when released.

Fig.2

To prevent the switch trigger from being accidentally

pulled, a lock-off button is provided.

To start the tool, depress the lock-off button and pull the

switch trigger. Release the switch trigger to stop.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before carrying out

any work on the tool.

Installing or removing saw chain

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before installing or

removing the saw chain.

• Always wear gloves when installing or removing

the saw chain.

• Use only saw chain and guide bar with bar tip

designed for this chain saw (see the Extract from

the spare parts list).

• In order to prevent kickback, do not remove the bar

tip or replace the guide bar with one without a bar

tip.

Fig.3

Loosen the screw by turning counterclockwise the knob

until the sprocket cover comes off.

Remove the sprocket cover.

Remove saw chain and guide bar from the tool.

Fig.4

Fit in one end of the saw chain on the top of guide bar.

At this time, fit the saw chain as shown in the figure

because it rotates in the direction of arrow.

Fig.5

Place the saw chain so that the spring and boss are

positioned inside it and fit in the other end of saw chain

around the sprocket as shown in the figure.

Fig.6

While turning the guide bar counterclockwise, install it so

that the end of guide bar contacts the spring.

Fig.7

Insert the hook of sprocket cover into the hole in the tool

and then place the sprocket cover on the tool.

Fig.8

Turn the knob clockwise to tighten the screw firmly.

Adjusting saw chain tension

Fig.9

Just a slight loosening of the screw allows the saw chain

tension to be adjusted. After adjusting, retighten the

screw firmly.

Fig.10

CAUTION:

• For a while after a new saw chain is installed, it

tends to become loosened. From time to time

check the saw chain tension before use.

• Low tension of saw chain may cause coming out of

place.

• Installing or removing saw chain should be carried

out in a clean place free from sawdust and the like.

OPERATION

Lubrication

Fig.11

Saw chain is automatically lubricated when the tool is in

operation.

Check the amount of remaining oil in the oil tank through

the oil inspection window.

To refill the tank, remove the cap from the oil tank

opening. The oil tank capacity is 80 ml.

After refilling the tank, always screw the provided oil tank

cap on the chain saw.

CAUTION:

• When filling the chain saw with chain oil for the first

time, or refilling the tank after it has been

completely emptied, add oil up to the bottom edge

of the filler neck. The oil delivery may otherwise be

impaired.

• As a saw chain oil, use oil exclusively for Makita

chain saws or oil available in market.

• Never use oil including dust and particles or

volatile oil.

• When pruning trees, use botanical oil. Mineral oil

may harm trees.

• Never force the chain saw when pruning trees.

• Before cutting out, make sure that the provided oil

tank cap is screwed in place.

Hold the chain saw away from the tree. Start it and wait

until lubrication on saw chain is adequate.

Bring the tip guide/lower guide into contact with the

branch to be cut before switching on. Cutting without

bringing the tip guide/lower guide into contact with the

branch may cause the guide bar to wobble, resulting in

injury to operator.

Saw the wood to be cut by just moving it down.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita BUC121 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info