Bedienungsanleitung Makita BVC340 (Seite 6 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch)

600684

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

15. When using the cleaner as a blower

• always use protective goggles, a cap and mask

while operating;

• always be sure that the cleaner is switched off

and the battery cartridge is removed before

clearing a blockage;

• always be sure of your footing on slopes;

• walk, never run;

• never point the nozzle at anyone in the vicinity;

• Keep all nuts, bolts and screws tight to be sure

the cleaner is in safe working condition;

• Store the cleaner only in a dry place;

• The operator or user is responsible for acci-

dents or hazards occurring to other people or

their property.

KEEP FOR FUTURE REFERENCE

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this instruc-

tion manual may cause serious personal injury.

This cleaner is intended for both domestic and commer-

cial use, for example in hotels, schools, hospitals, facto-

ries, shops, offices and rental businesses.

ENC007-6

IMPORTANT SAFETY INSTRUCTIONS

FOR BATTERY CARTRIDGE

1. Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using bat-

tery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any conduc-

tive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a break-

down.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

7. Do not incinerate the battery cartridge even if it

is severely damaged or is completely worn out.

The battery cartridge can explode in a fire.

8. Be careful not to drop or strike battery.

9. Do not use a damaged battery.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely

discharged.

Always stop tool operation and charge the bat-

tery cartridge when you notice less tool power.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room tempera-

ture at 10°C – 40°C (50°F – 104°F). Let a hot bat-

tery cartridge cool down before charging it.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the cleaner is switched off and the

battery cartridge is removed before adjusting or check-

ing function on the cleaner.

Installing or removing battery cartridge (Fig. 1)

• Always switch off the cleaner before insertion or

removal of the battery cartridge.

• To remove the battery cartridge, withdraw it from the

cleaner while sliding the button on the front of the car-

tridge as shown in the figure.

• To insert the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Always insert it all the way until it locks in

place with a little click. If you can see the red part on

the upper side of the button, it is not locked completely.

Insert it fully until the red part cannot be seen. If not, it

may accidentally fall out of the cleaner, causing injury

to you or someone around you.

• Do not use force when inserting the battery cartridge. If

the cartridge does not slide in easily, it is not being

inserted correctly.

Battery protection system

The cleaner is equipped with the protection system,

which automatically cuts off the output power for its long

service life.

The cleaner stops during operation when the cleaner

and/or battery are placed under the following situation.

This is caused by the activation of protection system and

does not show the cleaner trouble.

• When the cleaner is overloaded:

At this time, press the “OFF” button and remove

causes of overload and then press the “HIGH/LOW”

button again to restart.

• When battery cells get hot: (refer to the note below.)

If any operation of the “HIGH/LOW” button and the

“OFF” button, the motor will remain stopped. At this

time, stop use of the cleaner and cool or charge the

battery cartridge after removing it from the cleaner.

• When the remaining battery capacity gets low:

If any operation of the “HIGH/LOW” button and the

“OFF” button, the motor will remain stopped. At this

time, remove the battery cartridge from the cleaner

and charge it.

NOTE:

• This temperature-sensitive protection is applied only

when the cleaner is used with a battery cartridge with a

star mark. (Fig. 2)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita BVC340 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info