Bedienungsanleitung Makita CL106FD (Seite 9 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

657971

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

9 ENGLISH

Disposing of dust

CAUTION: Empty the cleaner before it

becomes too full, or the suction force weakens.

CAUTION: Be sure to empty the inside of the

cleaner itself of dust. Failure to do so may cause the

ltertobecloggedorthemotortobedamaged.

Inordertodropduststickingonthelterinthecapsule,

tap the capsule 4 or 5 times with your hand.

►Fig.6: 1. Capsule 2.Suctioninlet

Pointthesuctioninletdownwards,turnthecapsulein

direction of the arrow as illustrated, and disconnect the

capsule slowly and straight.

►Fig.7: 1. Capsule 2.Suctioninlet

NOTE: Be sure to set a garbage bag beneath the

capsule, as dust may spill out when the capsule is

opened.

Remove accumulated dust from inside of the capsule

andoffoftheprelter.

►Fig.8: 1.Prelter2. Capsule

Twisttheprelterindirectionofthearrowtounfasten

the securing lip from the cleaner unit and then pull off

theprelter.

►Fig.9: 1.Prelter2.Securinglip

Cleanoutnedustfromtheprelter.Andthen,pulloff

thelterandlightlytapittoremovedust.

►Fig.10: 1. Filter 2.Prelter

Reassembly

Putonthelterfullyinpositiononthecleanerunit.

►Fig.11: 1. Filter

NOTICE: Make sure the lter is put on straight

without being peeled back.Ifthelterisputon

incorrectly as illustrated, dust will get into the motor

housing, and cause a motor failure.

►Fig.12: 1. Filter

Installtheprelter.Atthistime,makesuretotwistthe

preltersothatthesecuringlipisrmlylockedinthe

cleaner unit.

►Fig.13: 1.Prelter2.Securinglip

►Fig.14

Install the capsule. Align the mark on the capsule with

themarknearthehandleandthenrmlytwistthecap-

sule in direction of the arrow until it is secured.

►Fig.15: 1. Capsule 2. Handle 3.Mark

NOTE: Always remove dust ahead of time, as the

suction power will be reduced if there is too much

dust in the cleaner.

NOTICE: Always be sure to check that both the

lter and prelter are loaded correctly prior to

using the cleaner. If they are not loaded correctly,

dust will get into the motor housing, and cause a

motorfailure.Ifthefollowingexamplesoccur,thelter

andprelterarenotloadedcorrectly.Reloadthem

correctly to rectify problem.

Problem Examples

Example1:Onlytheprelterhasbeenloaded(nolter)

►Fig.16: 1.Prelter

Example2:Onlythelterhasbeenloaded(noprelter)

►Fig.17: 1. Filter

Example3:Thelterhasbeenloadedinapeeledback

state

►Fig.18: 1. Filter

Example4:Thesecuringlipontheprelterisnotrmly

locked in the groove of cleaner housing

►Fig.19: 1.Securinglip2.Prelter3. Groove of

cleaner housing

OPERATION

CAUTION: To connect attachments, such

as nozzle, twist and insert the attachment in

direction of the arrow to secure the connection

during use. To disconnect the attachments, twist

and extract it also in direction of the arrow. If an

attachment is twisted in the opposite direction when

being connected or disconnected, the capsule may

become loose.

►Fig.20: 1. Capsule

Cleaning (Suction)

Nozzle

Attach the nozzle to clean off tables, desks, furniture,

etc. The nozzle slips on easily.

►Fig.21: 1. Nozzle

Nozzle + Extension wand (Straight

pipe)

Theextensionwandtsinbetweenthenozzleandthe

cleaner itself. This arrangement is convenient for clean-

ingaoorinastandingposition.

►Fig.22: 1. Cleaner body 2.Extensionwand

3. Nozzle

Corner nozzle

Fit on the corner nozzle for cleaning corners and crev-

ices of a car or furniture.

►Fig.23: 1. Corner nozzle 2. Cleaner body

Corner nozzle +Extension wand

(Straight pipe)

In tight quarters where the cleaner itself cannot squeeze

in, or in high places hard to reach, use this arrangement.

►Fig.24: 1. Corner nozzle 2.Extensionwand

3. Cleaner body

Cleaning without nozzle

You can pick up powder and dust without nozzle.

►Fig.25

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita CL106FD Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info