Bedienungsanleitung Makita CL108FD (Seite 11 von 21) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

690510

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

11 ENGLISH

Lighting up the lamp

CAUTION: Do not look in the light or see the

source of light directly.

►Fig.5:

1. ON/speed change button 2. OFF button 3. Lamp

To turn on the lamp, push the ON/speed change button.

Push the OFF button to turn off the lamp. During the

tool actuating, the lamp turns on.

When the remaining battery capacity gets low, the lamp

starts blinking.

NOTE: The timing, at which the lamp starts blinking,

depends on the temperature at work place and the

battery cartridge conditions.

ASSEMBLY

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before carrying out any work on the tool.

Type of lter

Normal lter

►Fig.6: 1. Capsule 2.Prelter3. Filter

High performance lter

►Fig.7: 1. Capsule 2.Highperformancelter

Disposing of dust

CAUTION: Empty the cleaner before it

becomes too full, or the suction force weakens.

CAUTION: Be sure to empty the inside of the

cleaner itself of dust. Failure to do so may cause the

ltertobecloggedorthemotortobedamaged.

Disposing of dust for normal lter

Inordertodropduststickingonthelterinthecapsule,

tap the capsule 4 or 5 times with your hand.

►Fig.8: 1. Capsule 2. Suction inlet

Point the suction inlet downwards, turn the capsule in direction of the

arrow as illustrated, and disconnect the capsule slowly and straight.

►Fig.9: 1. Capsule 2. Suction inlet

NOTE:

Be sure to set a garbage bag beneath the cap-

sule, as dust may spill out when the capsule is opened.

Remove accumulated dust from inside of the capsule

andoffoftheprelter.

►Fig.10: 1.Prelter2. Capsule

Twisttheprelterindirectionofthearrowtounfastenthe

securinglipfromthecleanerunitandthenpullofftheprelter.

►Fig.11: 1.Prelter2. Securing lip

Cleanoutnedustfromtheprelter.Andthen,pulloff

thelterandlightlytapittoremovedust.

►Fig.12: 1. Filter 2.Prelter

Disposing of dust for high

performance lter

Inordertodropduststickingonthelterinthecapsule,

tap the capsule 4 or 5 times with your hand.

Now point suction inlet downwards, turn capsule in

direction of arrow in diagram, and disconnect capsule

slowly and straight.

►Fig.13: 1. Capsule 2. Suction inlet

NOTE: Dust may spill out when capsule is opened, so

be sure to set a garbage bag beneath capsule.

Remove accumulated dust from inside of capsule and

offofhighperformancelter.

►Fig.14: 1. Capsule 2.Highperformancelter

Twisthighperformancelterindirectionofarrowto

unfasten securing lip from cleaner unit and then pull off

thelter.

►Fig.15: 1. Securing lip

Cleanoutthenedustandlightlytaptodislodgedust

fromhighperformancelter.

Reassembly

Reassembly for normal lter

Putonthelterfullyinpositiononthecleanerunit.

►Fig.16: 1. Filter

NOTICE: Make sure the lter is put on straight

without being peeled back.Ifthelterisputon

incorrectly as illustrated, dust will get into the motor

housing, and cause a motor failure.

►Fig.17: 1. Filter

Installtheprelter.Atthistime,makesuretotwistthe

preltersothatthesecuringlipisrmlylockedinthe

cleaner unit.

►Fig.18: 1.Prelter2. Securing lip

►Fig.19

Install the capsule. Align the mark on the capsule with

themarknearthehandleandthenrmlytwistthecap-

sule in direction of the arrow until it is secured.

►Fig.20: 1. Mark

►Fig.21: 1. Capsule 2. Handle 3. Mark

NOTE: Always remove dust ahead of time, as the

suction power will be reduced if there is too much

dust in the cleaner.

NOTICE: Always be sure to check that both the

lter and prelter are loaded correctly prior to

using the cleaner. If they are not loaded correctly,

dust will get into the motor housing, and cause a

motorfailure.Ifthefollowingexamplesoccur,thelter

andprelterarenotloadedcorrectly.Reloadthem

correctly to rectify problem.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita CL108FD Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info