Bedienungsanleitung Makita DBN600 (Seite 6 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691775

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

6 ENGLISH

WARNING:Thevibrationemissionduringactual

useofthepowertoolcandifferfromthedeclared

emission value depending on the ways in which the

tool is used.

WARNING:Besuretoidentifysafetymeasures

to protect the operator that are based on an estima-

tionofexposureintheactualconditionsofuse(taking

accountofallpartsoftheoperatingcyclesuchas

thetimeswhenthetoolisswitchedoffandwhenitis

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool.Failuretofollowallinstructions

listedbelowmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Cordless nailer safety warnings

1. Always assume that the tool contains fasten-

ers.Carelesshandlingofthenailercanresultin

unexpectedringoffastenersandpersonalinjury.

2. Do not point the tool towards yourself or any-

one nearby. Unexpected triggering will discharge

thefastenercausinganinjury.

3. Do not actuate the tool unless the tool is

placed rmly against the workpiece.Ifthetool

isnotincontactwiththeworkpiece,thefastener

maybedeectedawayfromyourtarget.

4. Disconnect the tool from the power source

when the fastener jams in the tool. While

removingajammedfastener,thenailermaybe

accidentallyactivatedifitispluggedin.

5. Use caution while removing a jammed fas-

tener.Themechanismmaybeundercompression

andthefastenermaybeforcefullydischarged

whileattemptingtofreeajammedcondition.

6. Do not use this nailer for fastening electrical

cables. Itisnotdesignedforelectriccableinstal-

lationandmaydamagetheinsulationofelectric

cablestherebycausingelectricshockorre

hazards.

7. Always wear safety glasses to protect your

eyes from dust or fastener injury.

8. Keep hands and feet away from the ejection

port area.

9. Follow instruction for lubricating and chang-

ing accessories.

10. Always remove the battery cartridge before

loading the fasteners, adjustment, inspection,

maintenance or after operation is over.

11. Make sure no one is nearby before operation.

Never attempt to drive fasteners from both the

inside and outside of wall at the same time.

Fasteners may rip through and/or y off, pre-

senting a grave danger.

12. Watch your footing and maintain your balance

with the tool. Make sure there is no one below

when working in high locations.

13. Never use fastener driving tools marked with

the symbol "Do not use on scaffoldings, lad-

ders" for specic application for example:

• whenchangingonedrivinglocationto

anotherinvolvestheuseofscaffoldings,

stairs,ladders,orladderalikeconstructions,

e.g.rooflaths;

• closingboxesorcrates;

• ttingtransportationsafetysystemse.g.on

vehicles and wagons.

14. Check walls, ceilings, oors, roong and

the like carefully to avoid possible electrical

shock, gas leakage, explosions, etc. caused by

stapling into live wires, conduits or gas pipes.

15. Use only fasteners specied in this manual.

The use of any other fasteners may cause

malfunction of the tool.

16. Do not tamper with the tool or attempt to use it

for other than driving fasteners.

17. Do not operate the tool without fasteners. It

shortens the service life of the tool.

18. Stop driving operations immediately if you

notice something wrong or out of the ordinary

with the tool.

19. Never fasten into any materials which may

allow the fastener to puncture and y through

as a projectile.

20. Never actuate the switch trigger and contact

element at the same time until you are pre-

pared to fasten workpieces. Allow the work-

piece to depress the contact element. Never

defeat its purpose by securing the contact

element back or by depressing it by hand.

21. Never tamper with the contact element. Check

the contact element frequently for proper

operations.

22. Always remove fasteners from the tool when

not in use.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product. MISUSE or failure to follow the safety

rules stated in this instruction manual may cause

serious personal injury.

Makita DBN600 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info