Bedienungsanleitung Makita DBN600 (Seite 10 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691775

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

10 ENGLISH

NOTE:Ifyoudrivenailscontinuouslyforalongtime,

theexhaustairwillgethotduetotheheatfromthe

motor.

Thetoolemploystwonailingactions:intermittentnailing

(sequentialmode)andcontinuous/intermittentnailing

(continuous mode).

►Fig.15: 1.Switchtrigger2. Contact element

3. Mode selecting switch 4.Sequential

mode 5. Continuous mode

Intermittent nailing (sequential mode)

1. Setthemodeselectingswitchtothesequential

mode.

2. Release the trigger lock.

3. Placeatthecontactelementonthematerial.

4. Pulltheswitchtriggerfullytodriveanail.

5. Todrivethenextnail,releasetheswitchtrigger

andcontactelementonce,andthenrepeatthestep3

and 4 above.

WARNING: Always be sure to rst place the

contact element against the workpiece before

pulling the trigger.

Continuous/intermittent nailing

(continuous mode)

1. Setthemodeselectingswitchtothecontinuous

mode.

2. Release the trigger lock.

3. Pulltheswitchtriggerrstandthenplacethe

contact element against the workpiece.

4. Todrivethenextnail,keepyourngerpullingthe

switch trigger and place the contact element against the

workpiece again.

NOTE:Thistoolstopsautomaticallyunderthefollow-

ingconditions:

• Whenyoureleasetheswitchtriggerorcontact

elementfromworkpiecebeforethetoolnishes

theoperationcompletely.Inthiscase,pullthe

trigger again until the tool turns into standby.

• Whenkeepingeitherpullingtheswitchtrigger

or placing the contact element about 5 seconds

withoutanotheraction.Inthiscase,releasethe

switchtriggerorthecontactelementfromwork-

piece to restart the operation.

Anti dry re mechanism

When the remaining nails in the magazine decrease to

6-9pieces,theswitchtriggercannolongerbepulled.

Atthistime,insertanewstripofnailsinthemagazine

and the switch trigger can be pulled again.

Removing jammed nails

WARNING: Always make sure that the battery

cartridge is removed before removing jammed

nails.

CAUTION: Be sure to lock the latch after

removing jammed nails.

Release the latch and open the door. Remove the

jammednailsandlockthelatch.

►Fig.16: 1. Latch 2. Door

Handling of the nails

Handlenailsandtheirboxcarefully.Ifthenailshave

beenhandledroughly,theymaybeoutofshapeortheir

connectorbreaks,causingpoornailfeed.

NOTICE: Avoid storing nails in a very humid or

hot place or place exposed to direct sunlight.

►Fig.17

MAINTENANCE

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before attempting to perform inspection or

maintenance.

NOTICE: Never use gasoline, benzine, thinner,

alcohol or the like. Discoloration, deformation or

cracks may result.

TomaintainproductSAFETYandRELIABILITY,

repairs,anyothermaintenanceoradjustmentshould

beperformedbyMakitaAuthorizedorFactoryService

Centers,alwaysusingMakitareplacementparts.

OPTIONAL

ACCESSORIES

CAUTION: These accessories or attachments

are recommended for use with your Makita tool

specied in this manual.Theuseofanyother

accessoriesorattachmentsmightpresentariskof

injurytopersons.Onlyuseaccessoryorattachment

foritsstatedpurpose.

Ifyouneedanyassistanceformoredetailsregard-

ingtheseaccessories,askyourlocalMakitaService

Center.

• Nails

• Makitagenuinebatteryandcharger

• Safetygoggles

NOTE:Someitemsinthelistmaybeincludedinthe

toolpackageasstandardaccessories.Theymay

differfromcountrytocountry.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DBN600 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info