793611
11
Zoom out
Zoom in
Vorherige Seite
1/84
Nächste Seite
11 ENGLISH
NOTE:-
ment easier.

suction hole
1. -
priate size.
Fig.5: 1. Abrasive paper 2. Pad
2.



3.
-


4. 
between the clamp and sanding base.
5. -

6. Set the clamp lever back in a locked position to

7. Release the clamp on the other end, and have the

8. 
then set the clamp lever on the other end in a locked
position.
Fig.6: 1. Abrasive paper 2. Clamp 3. Sanding base
4. Clamp lever 5. Stopper
9.
Cover the abrasive paper with the punch plate with


Fig.7: 1. Abrasive paper 2. Punch plate
3. Positioning stoppers 4. Pad 5. Sanding
base
10. Push the punch plate over the abrasive paper to
make dust-suction holes.
11. To remove the abrasive paper, release the clamps
󰀨

suction hole
Optional accessory
1.



2.
-


3. 
aligning the dust-suction holes in the paper with those
in the pad.
Fig.8: 1. Abrasive paper 2. Pad 3. Dust-suction hole
4. 
between the clamp and sanding base.
5. Set the clamp lever back in a locked position so

6. Release the clamp on the other end, and have the

7. 
then set the clamp lever on the other end in a locked
position.
Fig.9: 1. Abrasive paper 2. Clamp 3. Sanding base
4. Clamp lever 5. Stopper
8. To remove the abrasive paper, release the clamps
󰀨

CAUTION: Make sure to install a hook-and-
 A loose attach-


CAUTION: 

attached.
CAUTION: 


For DBO480
1. 
and-loop pad.
2. 
paper to the pad, aligning the dust-suction holes in the
paper with those in the pad.
Fig.10: 1. Abrasive paper 2. Pad 3. Dust-suction
holes
3.
󰀨
For DBO481 and DBO482
NOTICE: 


hole or the circular groove around the center of

DBO481
Fig.11: 1. Cap 2. Sanding base 3. Circular hole
DBO482
Fig.12: 1. O-ring 2. Sanding base 3. Circular groove
1. 
pad to the sanding base.
Fig.13: 1. Screws 2. Pad 3. Sanding base
2. Replace the standard-equipped pad with an
optional hook-and-loop pad.
3. 
and-loop pad.
Fig.14: 1. Abrasive paper 2. Pad 3. Dust-suction
holes
4. 
and-loop pad.
5. 
paper to the pad, aligning the dust-suction holes in the
paper with those in the pad.
Fig.15: 1. Abrasive paper 2. Pad 3. Dust-suction
holes
6. 󰀨
edge.
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Makita DBO482 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info