Bedienungsanleitung Makita DCJ201 (Seite 7 von 188) (Alle Sprachen)

600565

Zoom out

Zoom in

Vorherige Seite

1/188

Nächste Seite

Do not install the battery cartridge forcibly. If the cartridge

does not slide in easily, it is not being inserted correctly.

To remove the battery cartridge, slide it from the battery

holder while sliding the button (9) on the front of the

cartridge.

Attaching the battery holder to the heated

jacket

for CJ100D, CJ101D (Fig. 3)

Connect the battery holder and the power cable of the

jacket. Place the battery holder in the battery holder

pocket.

for DCJ200, DCJ201 (Fig. 3, 4)

You can either place the battery holder in the battery

holder pocket or hang on the belt.

In case placing it in the pocket, connect the battery holder

and the power cable of the jacket and place it in the

battery holder pocket.

In case hanging it on the belt, firstly pass the jacket’s plug

through the hole inside the battery holder pocket, and

connect the battery holder and the power cable of the

jacket. And then hang the battery holder on your belt.

Connecting USB device (For DCJ200,

DCJ201 only) (Fig. 5)

CAUTION:

• Connect only devices which are compatible with DC5V,

2.1A power source to the USB power supply port.

Otherwise it may cause malfunction to the battery

holder.

The battery holder (with the battery) can work as an

external power supply for USB device. Connect the USB

cable (not included) with the power supply port of the

battery holder. And then connect the other end of the

cable with the device. The USB cable can be placed

inside the jacket for convenience by using the hole of the

pocket and cable holder.

NOTE:

• Before connecting USB device to the charger, always

backup your data of USB device. Otherwise your data

may lose by any possibility.

• The charger may not supply power to some USB

devices.

• Wait for 10 seconds before charging another device

consecutively.

CAUTION:

Always be sure that the jacket is switched off and the

battery cartridge is removed before attempting to perform

inspection or maintenance.

If jacket does not switch on or any fault is found with a

fully charged battery cartridge, clean the terminals of the

battery holder and the battery cartridge. If jacket still does

not work properly, stop using the jacket and contact our

authorized service center.

CAUTION:

These accessories or attachments are recommended for

use with your Makita tool specified in this manual. The use

of any other accessories or attachments might present a

risk of injury to persons. Only use accessory or

attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• Makita genuine battery and charger

NOTE: Some items in the list may be included in the

package as standard accessories. They may differ from

country to country.

MAINTENANCE

OPTIONAL ACCESSORIES

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DCJ201 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info