Bedienungsanleitung Makita DES 380 (Seite 18 von 54) (Englisch, Holländisch, Französisch)

448349

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Guarantee

MAKITA guarantees the highest quality and will therefore reimburse all costs for mending through replacement of damaged parts as

a result of material or production faults, which occur within the guarantee time after purchase.

Please, note that in some countries particular guarantee conditions may exist. In case of any doubts, please, contact your salesman

who is responsible for the guarantee of the product.

We ask for your understanding that we cannot accept any responsibility for damage caused by:

• Disregard of the instruction manual.

• Non-performance of the required maintenance and cleaning instructions.

• Normal wear and tear.

• Obvious overload due to permanent excess of the upper limits of capacity.

• Use of guide bars and saw chains which have not been approved.

• Use of guide bar and saw chain lengths which have not been approved.

• Use of force, improper use, misuse or accidents.

• Damage caused by overheating due to dirt obstructing the cool air supply at the motor case.

• Use of unsuitable spare parts or parts which are not original MAKITA parts, as far as they have caused the damage.

• Use of unsuitable or old oil.

• Damage related to conditions arising from lease or rent contracts.

• Works on the chain saw by unskilled persons or performance of inappropriate repairs.

Cleaning, servicing and adjustment works are not covered by the guarantee. All repairs covered by the guarantee are to be

performed by a MAKITA service centre.

Extract from the spare parts list

Use original MAKITA spare parts only. For performance of repairs and for replacement of other

components your MAKITA service centre should be consulted.

Included in the delivery inventory Accessories (not included in the

delivery inventory)

Pos. MAKITA No. Qty. Denomination

1 205 114 201 1 Oil tank cap compl. 1 1 1 1

2 923 208 004 1 Fastening nut 1 1 1 1

3 205 213 670 1

Sprocket guard with brake

1111

4 442 030 661 1 Sprocket nose bar 30 cm (12") 1

4 442 035 661 1 Sprocket nose bar 35 cm (14") 1

4 442 040 661 1 Sprocket nose bar 40 cm (16") 1

4 444 038 141 1 Sprocket nose bar 38 cm (15”)1

5 528 092 646 1 Saw chain 3/8", 30 cm 1

5 528 092 652 1 Saw chain 3/8", 35 cm 1

5 528 092 656 1 Saw chain 3/8", 40 cm 1

5 532 484 064 1 Saw chain .325”, 38 cm 1

6 952 100 633 1 Chain protection cover (30-40 cm) 1 1 1 1

7 941 713 001 1 Universal wrench SW 13 1 1 1 1

300 350 400 380

Pos. MAKITA No. Qty. Denomination

1 953 100 090 1 Chain gauge 3/8”

953 100 071 1 Chain gauge .325”

2 953 004 010 1 File handle

3 953 003 090 1 Round file ø 4 mm

953 003 100 1 Round file ø 4,5 mm

953 003 070 1 Round file ø 4,8 mm

4 953 003 060 1 Flat file

5 953 030 010 1 File holder compl. 3/8”

953 030 030 1 File holder compl. .325”

Important information for order replacement saw chains and guide bars!

If using a guide bar with a 1.3 mm (.050”) groove width, only use the matching saw chain with a 1.3 mm (.050”) drive elemant strenght.

1.3 mm (.050”) groove width guide bars are marked with this symbol .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DES 380 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita DES 380

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info