Bedienungsanleitung Makita DFL125F (Seite 8 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691569

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

8 ENGLISH

Function Status of the tool Status of the LED indicator/beeper Action to be taken

LED indicator Beeper

Motor failure detection Motor failure has been

detected. At this time,

tool does not work.

Flickers in red and green

alternatively.

A series of short beeps Ask your local Makita

Service Center for repair.

Double-hitting detection When the operator

starts to re-fasten an

already-fastened screw,

the tool detect it and

stops.

Lights up in red. A long beep –

Maintenance alarm A maintenance time has

come according to your

preset number of screws

driven.

Flickers in yellow. – Reset the alarm with the

application software.

Alarm for unavailable

data communication

(with the tool in connec-

tion with PC)

Data cannot be

exchanged between the

tool and PC in spite of

the connection.

Flickers in yellow. – Restart the application

software and re-connect

the USB cable.

Indication that data com-

munication is available

(with the tool in connec-

tion with PC)

The tool is connected to

PC and data communi-

cation is available.

Flickers in green. – –

Adjusting the fastening torque

When you wish to drive machine screws, hex bolts,

etc. with the predetermined torque, adjust the fastening

torque as follows.

1. First remove the battery cartridge from the tool.

2. Loosen and remove the screw that secures the

ring and lamp cover.

►Fig.7: 1. Screw 2. Lamp cover

3. Rotate the ring in the front of the tool by hand so

that a hole can be seen below the ring.

►Fig.8: 1. Ring

4. Install the battery cartridge in place. Pull the

switch trigger and release it so that the adjust ring

rotates and the hole becomes visible. And then remove

the battery cartridge.

►Fig.9: 1. Adjust ring 2. Hole for adjust grip

5. Use an optional adjust grip to adjust the fastening

torque. Insert the pin of the adjust grip into the hole

in the front of the tool. And then, turn the adjust grip

clockwise to set a greater fastening torque, and coun-

terclockwise to set a smaller fastening torque.

6. Align the yellow line with your desired number on

the fastening torque scale.

►Fig.10: 1. Adjust grip 2. Hole for adjust grip 3. Scale

4. Yellow line

7. Insert the battery cartridge and be sure that a

fastening torque has been set up by using a fastening

torque tester.

8. Rotate the ring in front of the tool and then tighten

the screw to secure the ring and lamp cover.

NOTE: Numbers on the fastening torque scale is a

guideline to set up your desired fastening torque.

Adjusting no-load speed and

revolution angle etc.

You can adjust the no-load speed, number of turn, etc.

of the tool with your computer. Install the application

software in your computer and connect it to the tool with

an USB cable.

►Fig.11: 1. USB cable 2. USB cover 3. USB port

NOTICE: Make sure that the USB cover closed

when fastening.

NOTE: For the application software, please contact

Makita sales representative.

ASSEMBLY

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before carrying out any work on the tool.

Selecting correct socket

There are different types of sockets for some models

depending on applications. Choose and install a correct

socket for your application.

Installing or removing socket

►Fig.12: 1. Socket 2. Hole 3. Pin

To install the socket, push it onto the square drive of the

tool with one hand by depressing a pin on the square

drive with another hand until it locks into place. To

remove the socket, simply pull it off depressing the pin

on the square drive.

CAUTION: Before operation, make sure that

the socket is properly locked onto the square

drive. Incomplete attachment of the socket may

cause injury.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DFL125F Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info