Bedienungsanleitung Makita DFL651F (Seite 5 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691709

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE

or failure to follow the safety rules stated in this

instruction manual may cause serious personal

injury.

ENC007-10

IMPORTANT SAFETY INSTRUCTIONS

FOR BATTERY CARTRIDGE

1. Before using battery cartridge, read all

instructions and cautionary markings on (1)

battery charger, (2) battery, and (3) product

using battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any

conductive material.

(2) Avoid storing battery cartridge in a

container with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current

ow, overheating, possible burns and even a

breakdown.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

7. Do not incinerate the battery cartridge even if it

is severely damaged or is completely worn out.

The battery cartridge can explode in a re.

8. Be careful not to drop or strike battery.

9. Do not use a damaged battery.

10. Follow your local regulations relating to

disposal of battery.

SAVE THESE INSTRUCTIONS.

CAUTION: Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that

have been altered, may result in the battery bursting

causing res, personal injury and damage. It will

also void the Makita warranty for the Makita tool and

charger.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely

discharged.

Always stop tool operation and charge the

battery cartridge when you notice less tool

power.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room

temperature at 10°C – 40°C (50°F – 104°F). Let a

hot battery cartridge cool down before charging

it.

4. Charge the battery cartridge if you do not use it

for a long period (more than six months).

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before adjusting or

checkingfunctiononthetool.

Installing or removing battery cartridge (Fig. 1)

CAUTION:

• Alwaysswitchoffthetoolbeforeinstallingorremoving

ofthebatterycartridge.

• Hold the tool and the battery cartridge rmly when

installing or removing battery cartridge. Failure to

holdthetoolandthebatterycartridgermlymaycause

themtoslipoffyourhandsandresultindamagetothe

toolandbatterycartridgeandapersonalinjury.

Toremovethebatterycartridge,slideitfromthetoolwhile

slidingthebuttononthefrontofthecartridge.

To install the battery cartridge, align the tongue on the

batterycartridgewiththegrooveinthehousingandslip

itintoplace.Insertitallthewayuntilitlocksinplacewith

alittleclick.Ifyoucanseetheredindicatorontheupper

sideofthebutton,itisnotlockedcompletely.

CAUTION:

• Always install the battery cartridge fully until the red

indicatorcannotbeseen.Ifnot,itmayaccidentallyfall

outofthetool,causinginjurytoyouorsomeonearound

you.

• Do not install the battery cartridge forcibly. If the

cartridgedoesnotslideineasily,itisnotbeinginserted

correctly.

Battery protection system

The tool is equipped with a battery protection system.

Thissystemautomaticallycutsoffpowertothemotorto

extendbatterylife.

The tool will automatically stop during operation if the

tooland/orbatteryareplacedunderoneofthefollowing

conditions:

• Overloaded:

The tool is operated in a manner that causes it to

drawanabnormallyhighcurrent.

In this situation, turn the tool off and stop the

application that caused the tool to become

overloaded.Thenturnthetoolontorestart.

Ifthetooldoesnotstart,thebatteryisoverheated.

In this situation, let the battery cool before turning

thetoolonagain.

• Lowbatteryvoltage:

The remaining battery capacity is too low and the

tool will not operate. In this situation, remove and

rechargethebattery.

NOTE:

• The overheat protection works only with a battery

cartridgewithastarmarking.(Fig. 2)

Indicating the remaining battery capacity

(Fig. 3)

(Only for battery cartridges with “B” at the end of the

modelnumber.)

Makita DFL651F Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info