Bedienungsanleitung Makita DFT120T (Seite 14 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

793614

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

14 ENGLISH

ASSEMBLY

CAUTION: Always be sure that the tool is

󰀨

before carrying out any work on the tool.

Installing or removing driver bit/socket bit

Fig.16

Use only driver bit/socket bit that has inserting portion shown



For tool with shallow driver bit hole

A=12mm

B=9mm

Use only these type of driver

bit. Follow the procedure

1. (Note) Bit-piece is not

necessary.

For tool with deep driver bit hole

A=17mm

B=14mm

To install these types of driver

bits, follow the procedure 1.

A=12mm

B=9mm

To install these types of driver

bits, follow the procedure 2.

(Note) Bit-piece is necessary

for installing the bit.

Procedure 1

For tool without one-touch type sleeve

Fig.17: 1. Driver bit 2. Sleeve

To install the driver bit, pull the sleeve in the direction of

the arrow and insert the driver bit into the sleeve as far

as it will go.

Then release the sleeve to secure the driver bit.

For tool with one-touch type sleeve

To install the driver bit, insert the driver bit into the

sleeve as far as it will go.

Procedure 2

In addition to Procedure 1, insert the bit-piece into the

sleeve with its pointed end facing in.

Fig.18: 1. Driver bit 2. Bit-piece 3. Sleeve

To remove the driver bit, pull the sleeve in the direction

of the arrow and pull the driver bit out.

NOTE: If the driver bit is not inserted deep enough

into the sleeve, the sleeve will not return to its original

position and the driver bit will not be secured. In this

case, try re-inserting the bit according to the instruc-

tions above.

NOTE:󰀩

the sleeve and insert it into the sleeve as far as it will

go.

NOTE: After inserting the driver bit, make sure that it



Installing hook

Optional accessory

The hook is useful to hang the tool. Install the hook to

the holes on the tool body.

Fig.19: 1. Hook 2. Hole

OPERATION

Screwdriving operation

CAUTION: 

driver bit/socket bit securely over the screw head/

bolt head during fastening operation. Failure to

do so may cause mishandling of the tool resulting in

personal injury.

CAUTION: Make sure that the driver bit/

socket bit is placed straight over the screw head,

or the screw and driver bit/socket bit may be

damaged.

CAUTION: Keep hands away from the rotating

parts during operation. Failure to do so may cause

your hands to be caught in the moving parts, resulting

in personal injury.

Place the tip of the driver bit/socket bit straight over the

screw head/bolt head, apply pressure to the tool, and

then switch the tool on.

The tool automatically stops the motor when the output

torque reaches the target torque set in the application

software. Release the switch trigger after the tool

comes to a complete stop.

Fig.20

Limits of fastening capacity

NOTICE: Operating temperature range

Use the tool in the recommended ambient tempera-

ture range of 0 °C - 40 °C. Operation outside the

recommended temperature may reduce the tool

󰀩

unstable output torque.

Use the tool within the limits of its fastening capacity.

If you use the tool beyond the limits, the output torque

may be reduced as a means of tool protection.

For model DFT060T

2.0 6.03.0 5.0

4.0

360°

300°

240°

180°

120°

60°

30°

N•m

1. Range of fastening capacity 2. Rotation angle

3. Torque

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DFT120T Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info