Bedienungsanleitung Makita DFT127F (Seite 4 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691723

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

4 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model: DFT085F DFT127F

Fastening torque Hard joint 3 - 8 N•m 5 - 12 N•m

Soft joint 3 - 8 N•m 5 - 12 N•m

No load speed 150 - 900 min

-1

100 - 600 min

-1

Dimensions (L x W x H) with BL1415 battery 190 mm x 72 mm x 237 mm

with BL1430 battery 190 mm x 72 mm x 254 mm

Rated voltage D.C. 14.4 V

Standard battery cartridge BL1415, BL1415N, BL1415NA, BL1430, BL1430A, BL1430B,

BL1440, BL1450, BL1460A, BL1460B

Charger DC18RC, DC18RD, DC18SD, DC18SE, DC18SF

Net weight 1.3 - 1.8 kg

• Due to our continuing program of research and development, the specications herein are subject to change

without notice.

• Specications and battery cartridge may differ from country to country.

• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Intended use

The tool is intended for screw driving in wood, metal

and plastic.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841:

Model DFT085F

Sound pressure level (L

) : 70 dB(A) or less

Uncertainty (K) : 3 dB(A)

Model DFT127F

Sound pressure level (L

) : 70 dB(A) or less

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB (A).

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841:

Model DFT085F

Work mode: screwdriving without impact

Vibration emission (a

) : 2.5 m/s

or less

Uncertainty (K) : 1.5 m/s

Model DFT127F

Work mode: screwdriving without impact

Vibration emission (a

) : 2.5 m/s

or less

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE: The declared vibration emission value

may also be used in a preliminary assessment of

exposure.

WARNING: The vibration emission during actual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool. Failure to follow all instructions

listed below may result in electric shock, re and/or

serious injury.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DFT127F Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info