Bedienungsanleitung Makita DGA504ZJ (Seite 15 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

711150

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Noise

ENG905-1

The typical A-weighted noise level determined according

to EN60745:

Model DGA404

Sound pressure level (L

): 80 dB (A)

Sound power level (L

): 91 dB (A)

Uncertainty (K): 3 dB (A)

Model DGA454, DGA504

Sound pressure level (L

): 79 dB (A)

Uncertainty (K): 3 dB (A)

The noise level under working may exceed 80 dB (A).

Wear ear protection.

Vibration

ENG900-1

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Model DGA404

Work mode: surface grinding with normal side grip

Vibration emission (a

h,AG

): 4.5 m/s

Uncertainty (K): 1.5 m/s

Work mode: surface grinding with anti vibration side

grip

Vibration emission (a

h,AG

): 4.0 m/s

Uncertainty (K): 1.5 m/s

Work mode: disc sanding

Vibration emission (a

h,DS

): 2.5 m/s

or less

Uncertainty (K): 1.5 m/s

Model DGA454, DGA504

Work mode: surface grinding with normal side grip

Vibration emission (a

h,AG

): 6.5 m/s

Uncertainty (K): 1.5 m/s

Work mode: surface grinding with anti vibration side

grip

Vibration emission (a

h,AG

): 6.0 m/s

Uncertainty (K): 1.5 m/s

Work mode: disc sanding

Vibration emission (a

h,DS

): 2.5 m/s

or less

Uncertainty (K): 1.5 m/s

ENG902-1

• The declared vibration emission value has been

measured in accordance with the standard test method

and may be used for comparing one tool with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

• The declared vibration emission value is used for main

applications of the power tool. However if the power

tool is used for other applications, the vibration

emission value may be different.

WARNING:

• The vibration emission during actual use of the power

tool can differ from the declared emission value

depending on the ways in which the tool is used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of exposure in

the actual conditions of use (taking account of all parts

of the operating cycle such as the times when the tool

is switched off and when it is running idle in addition to

the trigger time).

For European countries only

ENH101-18

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

Cordless Angle Grinder

Model No./Type: DGA404, DGA454, DGA504

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

Standard or standardized documents:

EN60745

The Technical file in accordance with 2006/42/EC is

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

13. 3. 2014

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DGA504ZJ Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info