Bedienungsanleitung Makita DHR171 (Seite 10 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691024

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

10 ENGLISH

Beforeinstallingthedustcupset,removethebitfrom

thetoolifinstalled.

Installthespacersothatthegroovesonthespacert

in the protrusions on the tool barrel while widening it.

Becarefulforthespringnottocomeofffromtheslitof

spacer.

►Fig.14: 1. Spacer 2. Spring

►Fig.15

Installthesidegrip(optionalgripbasesetandstandard

grip)sothatthegrooveonthegriptintheprotrusion

onthespacer.Turnthegripclockwisetosecureit.

►Fig.16: 1. Side grip

Installthedustcupsetsothattheclawsofthedustcup

tinintheslitsonthespacer.

►Fig.17: 1. Dust cup 2. Claws

NOTE:Ifyouconnectavacuumcleanertothedust

cupset,removethedustcapbeforeconnectingit.

►Fig.18: 1. Dust cap

Toremovethedrillbit,pullthechuckcoverdownallthe

way and pull the drill bit out.

►Fig.19: 1. Bit 2. Chuck cover

Toremovethedustcupset,holdtherootofdustcup

and pull it out.

►Fig.20: 1. Dust cup

NOTE:Ifthecapcomesofffromthedustcup,attach

itwithitsprintedsidefacingupsothatgrooveonthe

captsintheinsideperipheryoftheattachment.

►Fig.21

Hook

Optional accessory

CAUTION:Alwaysremovethebatterywhen

hanging the tool with the hook.

CAUTION: Never hook the tool at high location

oronpotentiallyunstablesurface.

►Fig.22: 1. Groove 2. Hook 3. Screw

Thehookisconvenientfortemporarilyhangingthetool.

Thiscanbeinstalledoneithersideofthetool.

Toinstallthehook,insertitintoagrooveinthetool

housing on either side and then secure it with a screw.

Toremove,loosenthescrewandthentakeitout.

OPERATION

CAUTION: Always use the side grip (auxiliary

handle) and rmly hold the tool by both side grip

and switch handle during operations.

CAUTION: Always make sure that the work-

piece is secured before operation.

NOTE:Ifthebatterycartridgeisinlowtemperature,

thetool’scapabilitymaynotbefullyobtained.Inthis

case, warm up the battery cartridge by using the

toolwithnoloadforawhiletofullyobtainthetool’s

capability.

►Fig.23

Hammer drilling operation

CAUTION:Thereistremendousandsudden

twistingforceexertedonthetool/drillbitatthetimeof

hole break-through, when the hole becomes clogged

withchipsandparticles,orwhenstrikingreinforcing

rods embedded in the concrete. Always use the side

grip (auxiliary handle) and rmly hold the tool by

both side grip and switch handle during opera-

tions.Failuretodosomayresultinthelossofcontrol

ofthetoolandpotentiallysevereinjury.

Set the action mode changing knob to the symbol.

Positionthedrillbitatthedesiredlocationforthehole,

thenpulltheswitchtrigger.Donotforcethetool.Light

pressuregivesbestresults.Keepthetoolinposition

andpreventitfromslippingawayfromthehole.

Do not apply more pressure when the hole becomes

clogged with chips or particles. Instead, run the tool at

anidle,thenremovethedrillbitpartiallyfromthehole.

By repeating this several times, the hole will be cleaned

out and normal drilling may be resumed.

NOTE: Eccentricity in the drill bit rotation may occur

whileoperatingthetoolwithnoload.Thetoolauto-

maticallycentersitselfduringoperation.Thisdoesnot

affectthedrillingprecision.

Drilling in wood or metal

CAUTION: Hold the tool rmly and exert care

when the drill bit begins to break through the

workpiece.Thereisatremendousforceexertedon

thetool/drillbitatthetimeofholebreakthrough.

CAUTION: A stuck drill bit can be removed

simply by setting the reversing switch to reverse

rotation in order to back out. However, the tool

may back out abruptly if you do not hold it rmly.

CAUTION: Always secure workpieces in a

vise or similar hold-down device.

NOTICE: Never use “rotation with hammering”

when the drill chuck is installed on the tool.The

drill chuck may be damaged.

Also,thedrillchuckwillcomeoffwhenreversingthetool.

NOTICE: Pressing excessively on the tool will

not speed up the drilling.Infact,thisexcessive

pressurewillonlyservetodamagethetipofyourdrill

bit,decreasethetoolperformanceandshortenthe

servicelifeofthetool.

Set the action mode changing knob to the symbol.

Attachthechuckadaptertoakeylessdrillchuckto

which1/2"-20sizescrewcanbeinstalled,andthen

installthemtothetool.Wheninstallingit,refertothe

section “Installing or removing drill bit”.

►Fig.24: 1. Drill chuck assembly 2. Chuck adapter

Blow-out bulb

Optional accessory

Afterdrillingthehole,usetheblow-outbulbtocleanthe

dustoutofthehole.

►Fig.25

Makita DHR171 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info