Bedienungsanleitung Makita DHS660 (Seite 14 von 148) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691827

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

14 ENGLISH

Indicating the remaining battery capacity

Only for battery cartridges with the indicator

►Fig.9: 1. Indicator lamps 2. Check button

Pressthecheckbuttononthebatterycartridgetoindi-

catetheremainingbatterycapacity.Theindicatorlamps

light up for a few seconds.

Indicator lamps Remaining

capacity

Lighted Off Blinking

75% to 100%

50% to 75%

25% to 50%

0% to 25%

Charge the

battery.

Thebattery

mayhave

malfunctioned.

NOTE: Depending on the conditions of use and the

ambienttemperature,theindicationmaydifferslightly

fromtheactualcapacity.

Switch action

WARNING: Before installing the battery car-

tridge into the tool, always check to see that the

switch trigger actuates properly and returns to

the "OFF" position when released.

WARNING: NEVER defeat the lock-off button

by taping down or some other means. A switch with

anegatedlock-offbuttonmayresultinunintentional

operationandseriouspersonalinjury.

WARNING:

NEVER use the tool if it runs when you

simply pull the switch trigger without pressing the lock-off

button.Aswitchinneedofrepairmayresultinunintentional

operationandseriouspersonalinjury.ReturntooltoaMakita

service center for proper repairs BEFORE further usage.

Topreventtheswitchtriggerfrombeingaccidentallypulled,alock-

off button is provided. To start the tool, depress the lock-off button

and pull the switch trigger. Release the switch trigger to stop.

►Fig.10: 1. Switch trigger 2. Lock-off button

NOTICE: Do not pull the switch trigger hard

without pressing in the lock-off button. This can

cause switch breakage.

CAUTION: The tool starts to brake the cir-

cular saw blade rotation immediately after you

release the switch trigger. Hold the tool rmly to

respond the reaction of the brake when releasing

the switch trigger. Sudden reaction can drop the tool

offyourhandandcancauseapersonalinjury.

Automatic speed change function

This tool has "high speed mode" and "high torque mode".

Thetoolautomaticallychangestheoperationmode

depending on the work load. When the work load is low,

the tool will run in the "high speed mode" for quicker

cutting operation. When the work load is high, the tool

will run in the "high torque mode" for powerful cutting

operation.

►Fig.11: 1. Mode indicator

The mode indicator lights up in green when the tool is

running in "high torque mode".

If the tool is operated with excessive load, the mode

indicator will blink in green. The mode indicator stops

blinkingandthenlightsuporturnsoffifyoureducethe

load on the tool.

Mode indicator status Operation

mode

On Off Blinking

High speed

mode

High torque

mode

Overload

alert

Adjusting depth of cut

CAUTION: After adjusting the depth of cut,

always tighten the lever securely.

Loosen the lever and move the base up or down to align

thepointerwithyourdesireddepthonthedepthguide.

Atthedesireddepthofcut,securethebasebytighten-

ing the lever.

For cleaner, safer cuts, set cut depth so that no more

thanonebladetoothprojectsbelowworkpiece.Using

proper cut depth helps to reduce potential for danger-

ousKICKBACKSwhichcancausepersonalinjury.

►Fig.12: 1. Pointer 2. Lever

You can read the cut depth with the scale on the lower

guard.

►Fig.13: 1. Lower guard 2. Bottom of the tool base

3. Scale

Bevel cutting

CAUTION: After adjusting the bevel angle,

always tighten the lever and clamping screw

securely.

Loosen the lever and clamping screw. Set for the

desiredanglebytiltingaccordingly,thentightenthe

leverandclampingscrewsecurely.

►Fig.14: 1. Lever 2. Clamping screw

Usethestopperwhenyoudoprecise45°anglecutting.

Fullyturnthestopperasillustrateddependingon0°-

45° bevel cut or 0° - 50° bevel cut.

►Fig.15: 1. Stopper

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DHS660 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info