Bedienungsanleitung Makita DHS783 (Seite 10 von 156) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691830

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

10 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model: DHS782 DHS783

Blade diameter 185 - 190 mm

Max. Cutting depth at 0° 60.0 - 62.5 mm

at 45° bevel 43.0 - 44.5 mm

at 48° bevel 41.0 - 42.0 mm

No load speed 6,000 min

-1

Overall length 348 mm

Rated voltage D.C. 36 V

Net weight 4.5 - 5.1 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsandbatterycartridgemaydifferfromcountrytocountry.

• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combinations, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Batterycartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /

BL1840B / BL1850 / BL1850B / BL1860B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF

•

Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionofresidence.

WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges

andchargersmaycauseinjuryand/orre.

Intended use

Thetoolisintendedforperforminglengthwaysand

crosswaysstraightcutsandmitercutswithanglesin

woodwhileinrmcontactwiththeworkpiece.With

appropriate Makita genuine saw blades, other materials

can also be sawed.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN62841-2-5:

Model DHS782

Soundpressurelevel(L

):93dB(A)

Soundpowerlevel(L

):104dB(A)

Uncertainty(K):3dB(A)

Model DHS783

Soundpressurelevel(L

):93dB(A)

Soundpowerlevel(L

):104dB(A)

Uncertainty(K):3dB(A)

NOTE:Thedeclarednoiseemissionvalue(s)has

been measured in accordance with a standard test

methodandmaybeusedforcomparingonetoolwith

another.

NOTE:Thedeclarednoiseemissionvalue(s)

mayalsobeusedinapreliminaryassessmentof

exposure.

WARNING: Wear ear protection.

WARNING:

The noise emission during actual

use of the power tool can differ from the declared

value(s) depending on the ways in which the tool is

used especially what kind of workpiece is processed.

WARNING:

Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (tak-

ing account of all parts of the operating cycle such

as the times when the tool is switched off and when

it is running idle in addition to the trigger time).

Vibration

Thevibrationtotalvalue(tri-axialvectorsum)deter-

mined according to EN62841-2-5:

Model DHS782

Workmode:cuttingwood

Vibrationemission(a

h,W

):2.5m/s

or less

Uncertainty(K):1.5m/s

Workmode:cuttingmetal

Vibrationemission(a

h,M

):2.5m/s

or less

Uncertainty(K):1.5m/s

Model DHS783

Workmode:cuttingwood

Vibrationemission(a

h,W

):2.5m/s

or less

Uncertainty(K):1.5m/s

Workmode:cuttingmetal

Vibrationemission(a

h,M

):2.5m/s

or less

Uncertainty(K):1.5m/s

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DHS783 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info