Bedienungsanleitung Makita DJR181 (Seite 6 von 44) (Deutsch, Englisch, Polnisch)

600416

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Adjusting the shoe

Fig.3

Fig.4

When the blade loses its cutting efficiency in one place

along its cutting edge, reposition the shoe to utilize a

sharp, unused portion of its cutting edge. This will help to

lengthen the life of the blade. To reposition the shoe,

push the shoe button in the "A" direction with a click and

reposition as shown in the figure which allows you to

make five-way adjustment. To secure the shoe, push the

shoe button in the "B" direction with a click.

Switch action

Fig.5

CAUTION:

•

Before inserting the battery cartridge into the tool, always

check to see that the switch trigger actuates properly and

returns to the "OFF" position when released.

• When not operating the tool, depress the lock-off

button from A side to lock the switch trigger in the

OFF position.

To prevent the switch trigger from accidentally pulled,

the lock-off button is provided.

To start the tool, depress the lock-off button from B side

and pull the switch trigger.

Tool speed is increased by increasing pressure on the

switch trigger. Release the switch trigger to stop. After

use, always press in the lock-off button from A side.

Lighting up the front lamp (For DJR181)

Fig.6

CAUTION:

• Do not look in the light or see the source of light

directly.

Pull the switch trigger to light up the lamp. The lamp

keeps on lighting while the switch trigger is being pulled.

The light automatically goes out 10 - 15 seconds after

the switch trigger is released.

NOTE:

• Use a dry cloth to wipe the dirt off the lens of lamp.

Be careful not to scratch the lens of lamp, or it may

lower the illumination.

Hook (For DJR181)

Fig.7

CAUTION:

• Depress the lock-off button from A side to lock the

switch trigger in the OFF position. (See the section

titled " switch action " .)

• Never hook the tool at high location or on

potentially unstable surface.

The hook is convenient for hanging the tool temporarily.

To use the hook, simply lift up hook until it snaps into the

open position.

When not in use, always lower hook until it snaps into

the closed position.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before carrying out

any work on the tool.

Installing or removing the saw blade

CAUTION:

• Always clean out all chips or foreign matter

adhering to the blade, blade clamp and/or slider.

Failure to do so may cause insufficient tightening

of the blade, resulting in a serious injury.

To install the saw blade, always make sure that the

blade clamp lever is in released position

on the

insulation cover before inserting the saw blade. If the

blade clamp lever is in fixed position, rotate the blade

clamp lever in the direction of the arrow so that it can be

locked at the released positon

Fig.8

Insert the saw blade into the blade clamp as far as it will

go. The blade clamp lever rotates and the saw blade is

fixed. Make sure that the saw blade cannot be extracted

even though you try to pull it out.

Fig.9

NOTE:

• If you do not insert the saw blade deep enough, the

saw blade may be ejected unexpectedly during

operation. This can be extremely dangerous.

If the lever is positioned inside the tool, switch on the

tool just a second to let the blade out as shown in the

figure.

Remove the battery cartridge from the tool.

To remove the saw blade, rotate the blade clamp lever in

the direction of the arrow fully. The saw blade is

removed and the blade clamp lever is fixed at the

released position

Fig.10

NOTE:

• Keep hands and fingers away from the lever during

the switching operation. Failure to do so may

cause personal injuries.

• If you remove the saw blade without rotating the

blade clamp lever fully, the lever may not be locked

in the released position

. In this case, rotate the

blade clamp lever fully again, then make sure that

the blade clamp lever locked at the released

position

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DJR181 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita DJR181

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info