Bedienungsanleitung Makita DJR186ZK (Seite 7 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

711187

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

7 ENGLISH

Topreventtheswitchtriggerfromaccidentallypulled,

thelock-offbuttonisprovided.

Tostartthetool,depressthelock-offbuttonfromBside

and pull the switch trigger.

Toolspeedisincreasedbyincreasingpressureonthe

switchtrigger.Releasetheswitchtriggertostop.After

use,alwayspressinthelock-offbuttonfromAside.

ASSEMBLY

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before carrying out any work on the tool.

Installing or removing the recipro

saw blade

CAUTION: Always clean out all chips or for-

eign matter adhering to the blade and around the

blade clamp.Failuretodosomaycauseinsufcient

tighteningoftheblade,resultinginaseriousinjury.

Toinstallthereciprosawblade,alwaysmakesurethat

thebladeclamplever(partofthebladeclampsleeve)

is in released position

ontheinsulationcoverbefore

insertingthereciprosawblade.Ifthebladeclamplever

isinxedposition,rotatethebladeclampleverinthe

directionofthearrowsothatitcanbelockedatthe

released positon .

►Fig.5: 1. Blade clamp lever 2. Released position

3. Fixed position

Insertthereciprosawbladeintothebladeclampasfar

asitwillgo.Thebladeclampsleeverotatesandxes

thereciprosawblade.Makesurethatthereciprosaw

bladecannotbeextractedeventhoughyoutrytopull

it out.

►Fig.6: 1.Reciprosawblade2. Blade clamp sleeve

CAUTION: If you do not insert the recipro saw

blade deep enough, the recipro saw blade may be

ejected unexpectedly during operation.Thiscan

beextremelydangerous.

Toremovethereciprosawblade,rotatetheblade

clampleverinthedirectionofthearrowfully.Thereci-

prosawbladeisremovedandthebladeclampleveris

xedatthereleasedposition

►Fig.7: 1.Reciprosawblade2. Blade clamp lever

CAUTION: Keep hands and ngers away from

the lever during the switching operation. Failure

to do so may cause personal injuries.

NOTE:Ifyouremovethereciprosawbladewithout

rotatingthebladeclampleverfully,thelevermaynot

belockedinthereleasedposition .Inthiscase,

rotatethebladeclampleverfullyagain,thenmake

surethatthebladeclampleverlockedatthereleased

position

NOTE:Ifthebladeclampleverispositionedinside

thetool,switchonthetooljustasecondtoletthe

bladeoutasshowninthegure.Removethebattery

cartridgefromthetoolbeforeinstallingorremoving

thereciprosawblade.

OPERATION

CAUTION: Always press the shoe rmly

against the workpiece during operation.Ifthe

shoe is removed or held away from the workpiece

duringoperation,strongvibrationand/ortwistingwill

beproduced,causingthebladetosnapdangerously.

CAUTION: Always wear gloves to protect

your hands from hot ying chips when cutting

metal.

CAUTION: Be sure to always wear suitable

eye protection which conforms with current

national standards.

CAUTION: Always use a suitable coolant

(cutting oil) when cutting metal. Failure to do so will

causeprematurebladewear.

Presstheshoermlyagainsttheworkpiece.Donot

allowthetooltobounce.Bringthereciprosawblade

into light contact with the workpiece. First, make a pilot

grooveusingaslowerspeed.Thenuseafasterspeed

to continue cutting.

►Fig.8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DJR186ZK Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info