Bedienungsanleitung Makita DMR055 (Seite 7 von 78) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

793618

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

7 ENGLISH

Indicating the remaining battery

capacity (Fig. 3)

1. Indicator lamps 2. Check button

Press the check button on the battery cartridge to indicate

the remaining battery capacity. The indicator lamps light

up for few seconds.

●LXT battery cartridge

Indicator lamps

Remaining capacity

Lighted Off Blinking

75% ~ 100%

50% ~ 75%

25% ~ 50%

0% ~ 25%

Charge the battery

The battery may

have malfunctioned

NOTE:

●Depending on the conditions of use and the ambient

temperature, the indication may differ slightly from the

actual capacity.

● The rst (far left) indicator lamp will brink when the

battery protection system works.

LISTENING TO THE RADIO

Tuning the radio

1. Press the Power button to turn on the radio.

2. Select the FM or AM radio mode by repeatedly pressing

the Mode button.

3. Press and hold the Tuning up or Tuning down button

to scan the FM or AM band. The display will show the

frequency of the signal which has been found. To nd

more FM or AM stations repeat the scan operation.

Your radio will scan the FM or AM band from the

currently displayed frequency and will stop scanning

when it nds a signal of sufcient strength.

4. Press the Tuning up or Tuning down button to ne-tune

the frequency if needed.

5. Press the Volume up/down button to adjust the desired

sound level.

6. To turn off the radio, press the Power button.

NOTE:

For FM/AM radio mode, if the radio's reception is not

good, it may be necessary to relocate your radio to a

position giving better reception.

Preset memory stations

There are 9 preset stations each for AM and FM radio.

They are used in the same way for each waveband.

1. Press the Power button to turn on the radio.

2. Press the Mode button to select the desired waveband.

Tune to the required radio station as previously

described.

3. Press and hold the Preset up or Preset down button

until “M” ashes on the display.

4. Press the Preset up or Preset down button to select the

desired memory number.

5. Press and hold the Preset up or Preset down button

until “M” stops ashing on the display. The radio station

is stored into the selected memory preset. The display

will appear with the memory number.

6. Repeat this procedure as needed for the remaining

presets. Preset stations which have already been

stored may be overwritten by following the above

procedure if required.

Recall memory station

1. Turn on the radio and select the AM or FM radio mode.

2. Momentarily press the Preset up or Preset down button

to tune to your radio to one of the stations stored in the

preset memory.

LED lantern

1. Press the Light on/off button repeatedly to select

different light modes. This LED lantern features 2

different modes: 360˚ light coverage and side-carry

modes.

2. Press and hold the Light on/off button to turn off the

light.

MISCELLANEOUS SETTINGS

Using the strap (Fig. 4)

Using the supplied strap, you can hang the product in

different ways whenever needed. (Refer to the installation

method in Figure 4.)

MAINTENANCE

CAUTION:

●Never use gasoline, benzine, thinner, alcohol or the

like. Discoloration, deformation or cracks may result.

●Do not wash the radio with water.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DMR055 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info