Bedienungsanleitung Makita DMR057 (Seite 6 von 116) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

793621

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

6 ENGLISH

Liquid ejected from the battery may cause irritation

or burns.

10. Do not use a battery pack or tool that is damaged

or modified. Damaged or modified batteries may

exhibit unpredictable behaviour resulting in fire,

explosion or risk of injury.

11. Do not expose a battery pack or tool to fire

or excessive temperature. Exposure to fire or

temperature above 130°C (266°F) may cause

explosion.

12. Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions. Charging

improperly or at temperatures outside the specified

range may damage the battery and increase the risk

of fire.

13. Do not use the product at a high volume for any

extended period. To avoid hearing damage, use the

product at moderate volume level.

14. (For products with LCD display only) LCD displays

include liquid which may cause irritation and

poisoning. If the liquid enters the eyes, mouth or

skin, rinse it with water and call a doctor.

15. Do not expose the product to rain or wet conditions.

Water entering the product will increase the risk of

electric shock.

16. This product is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience

and knowledge, unless they have been given

supervision or instruction concerning use of the

product by a person responsible for their safety.

Children should be supervised to ensure that they

do not play with the product. Store the product out

of the reach of children.

SAVE THESE INSTRUCTIONS

SPECIFIC SAFETY RULES

FOR BATTERY CARTRIDGE

1. Before using battery cartridge, read all instructions

and cautionary markings on (1) battery charger, (2)

battery, and (3) product using battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively shorter,

stop operating immediately. It may result in a risk of

overheating, possible burns and even an explosion.

4. If electrolyte gets into your eyes, rinse them out with

clear water and seek medical attention right away. It

may result in loss of your eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any conductive

material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain. A battery short can cause a large current

flow, overheating, possible burns and even a

breakdown.

6. Do not store and use the tool and battery cartridge

in locations where the temperature may reach or

exceed 50°C (122°F).

7. Do not incinerate the battery cartridge even if it is

severely damaged or is completely worn out. The

battery cartridge can explode in a fire.

8. Be careful not to drop or strike battery.

9. Do not use a damaged battery.

10. To avoid risk, the manual of replaceable the battery

should be read before use.

11. The contained lithium-ion-batteries are subject to

the Dangerous Goods Legislation requirements.

For commercial transports e.g. by third parties,

forwarding agents, special requirement on

packaging and labeling must be observed. For

preparation of the item being shipped, consulting

an expert for hazardous material is required. Please

also observe possibly more detailed national

regulations. Tape or mask off open contacts and

pack up the battery in such a manner that it cannot

move around in the packaging.

12. When disposing the battery cartridge, remove

it from the tool and dispose of it in a safe place.

Follow your local regulations relating to disposal of

battery.

13. Use the batteries only with the products specified

by Makita. Installing the batteries to non- compliant

products may result in a fire, excessive heat,

explosion, or leak of electrolyte. If the tool is not

used for a long period of time, the battery must be

removed from the tool.

14. If the tool is not used for a long period of time, the

battery must be removed from the tool.

15. Do not allow chips, dust, or soil stuck into the

terminals, holes, and grooves of the battery

cartridge. It may result in poor performance or

breakdown of the tool or battery cartridge.

16. Keep the battery away from children.

17. During and after use, the battery cartridge may take

on heat which can cause burns or low temperature

burns.

18. Do not touch the terminal of the tool immediately

after use as it may get hot enough to cause burns.

19. Unless the tool supports the use near a high-

voltage electrical power lines, do not use the battery

cartridge near a high-voltage electrical power lines.

It may result in a malfunction or breakdown of the

tool or battery cartridge.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DMR057 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info