Bedienungsanleitung Makita DMR104 (Seite 7 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

600290

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

• To remove the battery cartridge, slide it from the tool

while sliding the button on the front of the cartridge or

pressing the buttons on both sides of the cartridge.

3-2. Installing or removing Cluster battery cartridge

(Fig. 5-9)

• Pull the supporting bar to allow the battery to insert to

the terminal.

• To insert the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place.

• Release the supporting bar.

• To remove the battery cartridge, pull the supporting bar

and take the battery out of the terminal.

4. Return the battery compartment locker to the original

position.

5. Reduced power, distortion and a “stuttering sound”

are the signs that the main battery pack needs to

replace.

Note:

The battery pack can’t be charged via the supplied AC

power adaptor.

Installing the soft bended rod antenna

(Fig. 10-11)

Install the soft bended rod antenna as shown in the figure.

Note:

There is a click in the battery compartment designed to

store the removed antenna.

Using supplied AC power adaptor

(Fig. 12)

Remove the rubber protector and insert the adaptor plug

into the DC socket on the front side of the radio. Plug the

adaptor into a standard mains socket outlet. Whenever

the adaptor is used, the battery pack is automatically

disconnected. The AC adaptor should be disconnected

from the main supply when not in use.

Operating the radio

This radio has three tuning methods- Scan tuning, Manual

tuning and Memory presets recall.

Selecting a station – DAB

1. Press the Power button to switch on your radio.

2. Select the DAB mode by pressing the Band button.

3. Press the Advanced setting button and rotate the

Volume/Tuning Control/Select knob until “Station List”

is flashing on the screen. Press the Volume/Tuning

Control/Select knob to enter the list of the stations.

4. Rotate the Volume/Tuning Control/Select knob to

scroll through the list of available stations. Press the

knob to select the station.

5. Adjust the desired volume by rotating the Volume/

Tuning Control/Select knob.

Display modes – DAB

Your radio has a range of display options in the DAB

mode:

Press the Info button to cycle through the various options

shown in the following letters (a. to g.).

a. Station name Indicates the station name being

listened to.

b. Program type Indicates the type of station being

listened to. E.g. Pop, Classics,

News, etc.

c. Multiplex name Indicates the name of the DAB

multiplex to which the current

station belongs.

d. Time & date Indicates the current time and date.

e. Frequency and channel

Indicates the frequency and

channel number for the currently

tuned DAB station.

f. Bit rate/Audio type

Indicates the digital audio bit rate

and audio type for the currently

tuned DAB station.

g. Signal strength Indicates the signal strength for the

currently tuned DAB station.

Finding new stations – DAB

From time to time, new DAB radio stations may become

available. Or you may have moved to a different part of

the country. In this case you may need to activate your

radio to scan for new stations.

To allow the radio to find the available stations, it is

recommended to carry out a full scan of the entire DAB

Band III frequencies.

1. Press the Auto tune button.

2. Your radio will perform a full scan of the DAB

frequencies. As new stations are found, the station

counter on the left side in the display will increase and

stations will be added to the list.

Manual tuning – DAB

Manual tuning allows you to tune your radio to a particular

DAB frequency in Band III. This function can also be used

to assist the positioning of the antenna or the radio so as

to optimize reception for a specific channel or frequency.

1. Press the Advanced setting button and rotate the

Volume/Tuning Control/Select knob until “Manual

Tune” shown on the display. Press the Volume/Tuning

Control/Select knob to enter the manual tuning mode.

2. Rotate the Volume/Tuning Control/Select knob to

select the desired DAB channel. Press Volume/Tuning

Control/Select knob to confirm the chosen frequency.

Dynamic Range Control (DRC) – DAB

DRC feature can make quieter sounds easier to hear

when your radio is used in a noisy environment by

reducing the dynamic range of the audio signal.

There are three levels of compression:

DRC 0 No compression applied.

DRC 1/2 Medium compression applied.

WARNING:

Do not use two main batteries at the same time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DMR104 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info