Bedienungsanleitung Makita DMR107 (Seite 9 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

657982

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Display will appear when buzzer alarm has

been set.

Snooze function

1. Whilst the alarm is activated, pressing any buttons

except the Power button will activate the snooze

function. The radio or HWS buzzer alarm will be

silenced with interval of 5 minutes.

2. The display will flash both the snooze symbol and

the alarm symbol. The snooze function can be

repeatedly during one hour that the alarms are active.

Sleep function

The sleep timer will automatically switch off the radio after

a preset time has elapsed.

1. Press and continue to hold down the Power button for

more than 2 seconds, followed by a beep tone, the

display will cycle through the available sleep times in

the order 60-45-30-15-120-90-60.

Release the Power button when the required sleep

time appears in the display. The symbol will

appear in the display and the radio will play the last

station selected.

2. To cancel the sleep function, press the Power button.

The Symbol will disappear and radio is off.

Display illumination

Press any buttons or rotate Tuning/Volume control knob

will illuminate the LCD display for approx. 15 seconds.

During scanning stations and alarm activated, will also

automatically illuminate the display.

Change Stereo to Mono

When the stereo FM station reception is weak, you can

improve it by pressing Mono button for 2 seconds. The

sound is no longer in stereo and stereo indicator

disappears.

How to play other audios

CAUTION:

Unplug this apparatus before connecting other

audios.

• There are 2 AUX in sockets. AUX 1 is located on the

front panel, and AUX 2 is located in the battery

compartment.

• Connect a stereo or mono source (i.e. iPod, MP3, or

CD player) to either AUX 1 or AUX 2 by audio cord.

• Repeatedly press and release the Band button until

“AU1” or “AU2” is displayed, then AUX function is

activated.

• AUX can’t be activated as alarm source.

MAINTENANCE

CAUTION:

• Never use gasoline, benzine, thinner, alcohol or the

like. Discoloration, deformation or cracks may result.

Specifications:

Power Requirements

AC power adaptor DC12 V 700 mA, center pin

positive

Battery UM-3 (AA size) x 2 for back up

Cluster battery: 7.2 V - 10.8 V

Slide battery: 10.8 V - 18 V

Frequency coverage FM 87.50 - 108 MHz

(0.05 MHz/step)

AM (MW) 522 - 1,710 kHz

(9 kHz/step)

Circuit feature

Loudspeaker 3 inches 8 ohm

Output Power 7.2 V: 0.5 W x 2, 10.8 V: 1.2 W x 2,

14.4 V: 2.2 W x 2, 18 V: 3.5 W x 2

Input terminal 3.5 mm dia. (AUX IN1/AUX IN2)

Antenna system FM: soft bended rod antenna

AM: bar antenna

Dimension (W x H x D) in mm

280 x 302 x 163

Weight

Battery cartridge (kg)

(Without battery) 4.0

BL7010 4.1

BL1013

4.2BL1015

BL1020B

BL1415

4.3

BL1415N

BL1040B

4.4

BL1815

BL1815N

BL1820

BL1820B

BL1430

4.5BL1440

BL1450

BL1830

4.6

BL1830B

BL1840

BL1840B

BL1850

BL1850B

BL1860B

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DMR107 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info