Bedienungsanleitung Makita DPO600 (Seite 8 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691391

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

8 ENGLISH

Switch action

CAUTION: Before installing the battery car-

tridge into the tool, always check to see that the

switch trigger actuates properly and returns to

the "OFF" position when released.

CAUTION: Switch can be locked in "ON" posi-

tion for ease of operator comfort during extended

use. Apply caution when locking tool in "ON"

position and maintain rm grasp on tool.

CAUTION: Do not install the battery cartridge

with the lock button engaged.

CAUTION: When not operating the tool,

depress the trigger-lock button from side to

lock the switch trigger in the OFF position.

►Fig.3: 1. Trigger-lock button

►Fig.4: 1. Switch trigger 2. Lock button 3. Trigger-

lock button

Topreventtheswitchtriggerfromaccidentallypulled,the

trigger-lock button is provided. To start the tool, depress

thetrigger-lockbuttonfromA( )sideandpulltheswitch

trigger.Toolspeedisincreasedbyincreasingpressureon

the switch trigger. Release the switch trigger to stop. After

use,depressthetrigger-lockbuttonfromB( )side.

For continuous operation, depress the lock button while

pulling the switch trigger, and then release the switch trigger.

Tostopthetool,pulltheswitchtriggerfully,thenreleaseit.

Speed adjusting dial

►Fig.5: 1.Speedadjustingdial

Therotatingspeedcanbechangedbyturningthe

speedadjustingdialtoagivennumbersettingfrom1to

5. Higher speed is obtained when the dial is turned in

the direction of number 5. And lower speed is obtained

when it is turned in the direction of number 1.

Refer to the table for the relationship between the number

settings on the dial and the approximate rotating speed.

Normal mode

Number Orbits per min. Pad rotating speed per

minute in random orbit with

forced rotation mode

1 1,600 180

2 2,500 290

3 4,000 460

4 5,600 650

5 6,800 780

Finishing mode

Number Orbits per min. Pad rotating speed per

minute in random orbit with

forced rotation mode

1 1,600 180

2 2,200 250

3 3,300 380

4 4,400 500

5 5,200 600

NOTICE: If the tool is operated continuously

at low speeds for a long time, the motor will get

overloaded, resulting in tool malfunction.

NOTICE: The speed adjusting dial can be turned

only as far as 5 and back to 1. Do not force it past

5 or 1, or the speed adjusting function may no

longer work.

Selecting the action mode

Turn the change knob to alter the rotation mode.

►Fig.6: 1. Change knob

NOTICE: Always turn the knob fully. If the knob

is in the middle position, you cannot turn on the

tool.

NOTICE: You cannot change the action mode

when the tool is switched on.

Random orbit with forced rotation

mode

►Fig.7: 1. Change knob

Random orbit with forced rotation mode is orbital action

with forced rotation of the pad for rough polishing such

as surface treatment.

Rotate the change knob counterclockwise for random

orbit with forced rotation mode.

Random orbit mode

►Fig.8: 1. Change knob

Random orbit mode is orbital action with free rotation of

thepadfornepolishing.

Rotate the change knob clockwise for random orbit

mode.

Finishing mode

Inthenishingmode,youcanoperatethetoolwithout

applyingexcessiveload.Thismodeissuitableforn-

ishing operation.

Tousethetoolinthenishingmode,pulltheswitch

trigger and release it to turn on the tool, and then press

the mode switching button. The lamp lights up in green.

To return to the normal mode, press the mode switching

button while the tool is turned on.

►Fig.9: 1. Lamp 2. Mode switching button

NOTE: You cannot change the mode when the tool

is running.

Accidental restart preventive

function

Ifyouinstallthebatterycartridgewhilepullingthe

switch trigger or locking the switch trigger, the tool does

not start. To start the tool, release the switch trigger, and

then pull the switch trigger.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DPO600 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info