Bedienungsanleitung Makita DSD180 (Seite 9 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

657238

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

9 ENGLISH

Attaching blade cap

CAUTION: Always attach the blade cap when

tool is not used.Abareblademaycausepersonal

injuryordamagetothebladeitself.

Passthebladecapthroughthebladeuntilthehook

catches the base cover. Note the direction of the blade

cap when attaching; the wider hook comes front side.

When removing the blade cap, lift it while pinching the

both sides.

►Fig.15: 1. Blade cap 2. Hook

During operation, insert the blade cap to the hook on

the base as illustrated until it clicks.

►Fig.16: 1. Blade cap 2. Hook

Hex wrench storage

When not in use, store the hex wrench as shown in the

guretokeepitfrombeinglost.

►Fig.17: 1. Hex wrench

Connecting a vacuum cleaner

Connect a Makita vacuum cleaner for clean operation.

Remove the rubber cap on the dust collector and connect

the vacuum cleaner's hose to the nozzle of the dust collector.

►Fig.18: 1. Dust collector 2. Rubber cap 3. Vacuum

cleaner hose

OPERATION

CAUTION: Hold the tool rmly.

CAUTION: Always hold the base ush with

the workpiece during cutting. Never perform a

curved cut. Failure to do so may cause blade break-

age,resultinginaseriousinjury.

TheV-notchandconvexedportioninthebasecoverof

thetoolindicatethepositionoftheblade.Alwayscheck

the blade position when cutting.

The base cover of the tool

►Fig.19: 1. V-notch 2. Convexed portion 3. Blade

NOTE: For accurate cutting, it is recommended to

draw cutting lines on the workpiece beforehand.

1. Placethetipofthebladeonthestartline.Tiltthe

tool so that the front edge of the base touches the work-

piece.AlignthebottomoftheV-notchinthefrontedge

with the cutting line.

►Fig.20

2. Slowly pull the trigger without the blade making

any contact with the workpiece. When the blade attains

fullspeed,pushthetooltowardtheworkpiece.Asthe

blade pierces the workpiece, make the whole surface of

the base cover contact with the workpiece.

►Fig.21

3. Move the tool straight forward until the cutting

nishes.

MAINTENANCE

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before attempting to perform inspection or

maintenance.

NOTICE: Never use gasoline, benzine, thinner,

alcohol or the like. Discoloration, deformation or

cracks may result.

Cleaning the base cover

Clean off the cutting chips and dust accumlated on the

base cover. Lift the base cover while pulling the hook on

the back end to remove. Follow the removal procedure

in reverse when installing.

►Fig.22: 1. Base cover 2. Hook

CAUTION: Pay attention to the tip of the blade

and cutting chips when removing the base cover.

NOTICE:Performthecleaningperiodically.Dirty

base cover may damage or deface the working

surface.

TomaintainproductSAFETYandRELIABILITY,

repairs,anyothermaintenanceoradjustmentshould

beperformedbyMakitaAuthorizedorFactoryService

Centers, always using Makita replacement parts.

OPTIONAL

ACCESSORIES

CAUTION: These accessories or attachments

are recommended for use with your Makita tool

specied in this manual.Theuseofanyother

accessories or attachments might present a risk of

injurytopersons.Onlyuseaccessoryorattachment

for its stated purpose.

Ifyouneedanyassistanceformoredetailsregard-

ing these accessories, ask your local Makita Service

Center.

• Drywallsawblade

• Woodsawblade

• Dustbox

• Dustcollector

• Hexwrench

• Hook

• Makitagenuinebatteryandcharger

NOTE: Some items in the list may be included in the

toolpackageasstandardaccessories.Theymay

differ from country to country.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DSD180 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info