Bedienungsanleitung Makita DSL800ZU (Seite 14 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

711195

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

14 ENGLISH

Installing the abrasive disc

►Fig.10: 1.Abrasivedisc2. Pad

Removeanydirtorforeignmatterfromthepad,and

thenattachtheabrasivedisctothepadwhilealigning

theholesintheabrasivediscwiththoseinthepad.

Adjusting the pipe length

CAUTION: When adjusting the pipe length,

hold the tool horizontally. Otherwise, the pipe

lengthmaychangeunintentionallyanditmaycause

aninjuryormalfunctionofthetool.

NOTICE: Do not extend the pipe beyond the

limit.Failuretodosomaycauseamalfunctionof

the tool.

►Fig.11: 1. Sleeve 2. Pipe

Toadjustthepipelength,loosenthesleeve,thenadjust

the length of the pipe, and then tighten the sleeve.

Installing or removing the dust

collection brush

Before sanding operation, install the dust collection

brushtothesandingheadasshowninthegure.

►Fig.12: 1.Dustcollectionbrush2. Sanding head

Youcanremovethedustcollectionbrushforoperation

alongtheedgeofwallorceiling.Theremovedbrush

canbeattachedtothesandingheadasshowninthe

gure.

►Fig.13: 1.Dustcollectionbrush2. Sanding head

Hex wrench storage

►Fig.14: 1. Hex wrench

When not in use, store the hex wrench as shown in the

guretokeepitfrombeinglost.

Installing or removing the pad

►Fig.15: 1. Hex wrench 2. Bolt 3. Pad

Toremovethepad,removetheabrasivediscfromthe

pad,andthenturntheboltcounterclockwisewithahex

wrench. To install the pad, perform the removal proce-

dure in reverse.

CAUTION: Make sure that the pad is secured

properly.Looseattachmentwillrunoutofbalance

andcauseanexcessivevibrationwhichmaycause

loss of control.

Connecting a vacuum cleaner

Optional accessory

Whenyouwishtoperformoperationcleanly,connecta

Makitavacuumcleanertoyourtool.Connectahoseof

the vacuum cleaner to the dust nozzle using the front

cuff 24.

►Fig.16: 1. Hose of the vacuum cleaner 2.Frontcuff

24 3. Dust nozzle

Installing or removing the extension handle

Optional accessory

To install the extension handle, attach the extension handle to the

toolandsecureitwiththeknobrmly.Besuretoinserttheend

of the tool into the holder of the extension handle. To remove the

extension handle, perform the installation procedure in reverse.

►Fig.17:

1.Extensionhandle2.Knob3. Holder 4.Endoftool

OPERATION

CAUTION: Only use Makita genuine pads for

sanding (optional accessories).

CAUTION:

Make sure the work material is secured

and stable. Falling object may cause personal injury.

CAUTION: Hold the tool rmly with one hand

on the switch handle and the other hand on the

front grip when operating the tool.

CAUTION:

Do not run the tool at high load over

an extended time period.Itmayresultintoolmalfunction

whichcauseselectricshock,reand/orseriousinjury.

CAUTION:

Be careful not to touch the rotating part.

NOTICE: Never force the tool. Excessivepressure

mayleadtodecreasedsandingefciency,damaged

pad, or shorten tool life.

NOTICE: Continuous operation at high speed

may damage work surface.

1. Positionthetoollightlyagainsttheworksurface.

Applylightpressureenoughtoalignthesandinghead

with the work surface.

Applyadditionalpressuretoengagethepadonthe

work surface. Move the tool in an overlapping pattern in

constantmotiontosmooththedrywallcompound.

►Fig.18

Operating the tool with the extension handle

Optional accessory

CAUTION:

Hold the tool rmly with one hand on the

switch handle and the other hand on the extension handle

when operating the tool with the extension handle.

Wearthebeltfortheextensionhandleasshowninthegure.

►Fig.19: 1. Belt

2. Attachtheholdertothebelt.

►Fig.20: 1. Holder 2. Belt

3. Put the end of the extension handle into the holder

to support the tool.

►Fig.21: 1.Endofextensionhandle2. Holder

Operatethetoolinthesamewayasthetoolwithoutthe

extension handle.

►Fig.22

Youcanalsooperatethetoolwithoutusingthebeltand

theholderasshowninthegure.

►Fig.23

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DSL800ZU Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info