Bedienungsanleitung Makita DTR181 (Seite 18 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

793624

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

18 ENGLISH

NOTICE: Be sure to mount the wire reel in the

 If it is mounted the

other way around, the wire will be released and may

be twisted.

4. Unhook the wire tip from the hook of reel.

Fig.13: 1. Hook

5. Make the tip of the wire straight, and pass the wire

through the guide.

Fig.14: 1. Guide

NOTE: If the tip of the wire is bent when it is passed



the tool.

NOTE: If you force the wire when trying to pass it



6. Pull the wire out approximately 10 mm from the tip

of the arm.

Fig.15: 1. Arm 2. Approximately 10 mm

NOTICE: If the length of the pulled-out wire is

󰀩󰀨

or tying strength may be compromised due to

󰀩

7. Rewind the wire to eliminate its slack.

Fig.16

8. Release the lock lever. The release lever returns,

and the wire is held by the left and right gears.

Fig.17: 1. Lock lever 2. Release lever

Fig.18: 1. Gear 2. Path of the wire 3. Wire

NOTICE: When the lock lever is released and

when the left and right gears mesh with each

other, the grooves in the gears form a space. This

space becomes the path for the wire. Make sure

that the wire is passed through this path.

9. Close the reel cover.

Fig.19: 1. Reel cover

Replacing wire guide B

Optional accessory

The wire guide B (in silver color) in the arm can be

replaced with an optional wire guide B (EG) (in black

color) according to the type of tying wire to use.

Find the right combination in the following table. Then

replace the standard equipped wire guide B with an

optional wire guide B (EG) if necessary.

Standard

equipped wire

guide B complete

(silver)

Optional wire

guide B complete

(black)

Annealing iron tie wire

Poly coated tie wire -

Galvanized tie wire -

— : The combination is not valid.

1. Loosen bolts A and B using the hex wrench

included in the tool package.

Fig.20: 1. Hex wrench

Fig.21: 1. Bolt A 2. Bolt B 3. Contact plate cover

4. Standard equipped wire guide B (silver)

NOTICE: Do not forcibly remove any bolts that

cannot be removed using the hex wrench.

2. Pull the contact plate cover up in the direction of

the arrow and remove it. Bolt B will be removed at the

same time.

Fig.22: 1. Contact plate cover 2. Bolt B

3. Remove bolt A, and remove the standard

equipped wire guide B (silver).

Fig.23: 1. Bolt A 2. Standard equipped wire guide

B (silver)

4. Replace the standard equipped wire guide B (in

silver color) with an optional wire guide B (EG) (in black

color).

Fig.24: 1. Optional wire guide B (EG) (in black

color).

5. Align the pipe of the tool with the groove inside the

optional wire guide B (EG) (black), and assemble them.

Fig.25: 1. Pipe 2. Groove 3. Optional wire guide B

(EG) (black).

6. Fix the optional wire guide B (EG) (black) by tem-

porarily tightening bolt A.

Fig.26: 1. Bolt A 2. Optional wire guide B (EG)

(black).

7. Install the contact plate cover in the direction of

the arrow.

Fig.27: 1. Contact plate cover

8. Fix the optional wire guide B (EG) (black) and con-

tact plate cover securely by tightening bolt A and bolt B.

Fig.28: 1. Optional wire guide B (EG) (black).

2. Contact plate cover 3. Bolt A 4. Bolt B

9. 



Fig.29: 1. Contact plate

NOTE: If the contact plate is caught, press it as



Fig.30

OPERATION

Checking before work

CAUTION: If the tool has a safety mecha-

nism-related problem, do not use it. If you continue

to use it, an accident may occur.

Before using the tool, make sure that the safety mecha-

nism operates normally. If the tool operates without the

safety mechanism operating, stop using the tool imme-

diately. Ask your local Makita Service Center for repairs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DTR181 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info