Bedienungsanleitung Makita DUC204 (Seite 11 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

690904

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

11 ENGLISH

13. Before starting work, check that the chain

saw is in proper working order and that its

condition complies with the safety regulations.

Check in particular that:

• Thechainbrakeisworkingproperly;

• Therun-downbrakeisworkingproperly;

• Thebarandthesprocketcoveraretted

correctly;

• Thechainhasbeensharpenedandten-

sioned in accordance with the regulations.

14. Do not start the chain saw with the chain cover

being installed on it. Starting the chain saw with

the chain cover being installed on it may cause

the chain cover to thrown out forward resulting in

personalinjuryanddamagetoobjectsaroundthe

operator.

Top handle chainsaw specic safety

warnings

1. This chain saw is designed especially for tree

care and surgery. The chain saw is intended

to be used by properly trained persons only.

Observe all instructions, procedures and rec-

ommendations from the relevant professional

organization. Otherwise fatal accidents may

occur. It is recommend that always using a

rising platform (cherry picker, lift) for sawing

in trees. Rappelling techniques are extremely

dangerous and require special training. The

operators must be trained to become familiar

with safety equipment usage and climbing

techniques. Always use the appropriate belts,

ropes and carabiners when working in trees.

Always use restraining equipment for both the

operator and the saw.

2. Perform cleaning and maintenance before

storage in accordance with the instruction

manual.

3. Ensure safe positioning of the chain saw

during car transportation to avoid fuel or chain

oil leakage, damage to the tool and personal

injury.

4. Regularly check the functionality of chain

brake.

5. Do not ll the chain oil near re. Never smoke

when you ll the chain oil.

6. National regulation may restrict the use of the

chain saw.

7. If the equipment gets heavy impact or fall,

check the condition before continuing work.

Check the controls and safety devices for mal-

function. If there is any damage or doubt, ask

our authorized service center for the inspec-

tion and repair.

8. Always activate the chain brake before starting

the chain saw.

9. Hold the saw rmly in place to avoid skating

(skid movement) or bouncing of the saw when

starting a cut.

10. At the end of the cut, be careful to keep your

balance due to the “drop”.

11. Take into account the direction and speed of

the wind. Avoid sawdust and chain oil mist.

Protective equipment

1. In order to avoid head, eye, hand or foot

injuries as well as to protect your hearing the

following protective equipment must be used

during operation of the chain saw:

—

Thekindofclothingshouldbeappropriate,i.e.

itshouldbetight-ttingbutnotbeahindrance.

Donotwearjewelryorclothingwhichcould

become entangled with bushes or shrubs. If you

have long hair, always wear a hairnet!

— It is necessary to wear a protective helmet

wheneverworkingwiththechainsaw.The

protective helmet is to be checked in regu-

lar intervals for damage and is to be replaced

after 5 years at the latest. Use only approved

protective helmets.

— Theface shield of the protective helmet (or

the goggles) protects against sawdust and

wood chips. During operation of the chain

saw always wear a goggle or a face shield to

preventeyeinjuries.

— Wearadequatenoise protection equip-

ment (ear muffs, ear plugs, etc.)

— Theprotective jacket consists of 22 layers

of nylon and protects the operator against

cuts. It is always to be worn when working

from elevated platforms (cherry pickers,

lifts), from platforms mounted on ladders or

when climbing with ropes.

— Theprotective brace and bib overall is

made of a nylon fabric with 22 layers and

protects against cuts. We strongly recom-

mend its use.

—

Protective gloves made of thick leather are part

oftheprescribedequipmentandmustalwaysbe

worn during operation of the chain saw.

— During operation of the chain saw safety

shoes or safety bootsttedwithantiskid

sole, steel toe caps and protection for the

leg must always to be worn. Safety shoes

equippedwithaprotectivelayerprovide

protection against cuts and ensure a secure

footing. For working in trees the safety boots

mustbesuitableforclimbingtechniques.

Vibration

1. Individuals with poor circulation who are exposed

toexcessivevibrationmayexperienceinjuryto

blood vessels or the nervous system. Vibration

may cause the following symptoms to occur in the

ngers,handsorwrists:“Fallingasleep”(numb-

ness), tingling, pain, stabbing sensation, alteration

of skin colour or of the skin. If any of these symp-

toms occur, see a physician!Toreducetherisk

of“whitengerdisease”,keepyourhandswarm

duringoperationandwellmaintaintheequipment

and accessories.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product. MISUSE or failure to follow the safety

rules stated in this instruction manual may cause

serious personal injury.

Makita DUC204 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info