Bedienungsanleitung Makita DUC353 (Seite 10 von 128) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

690908

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

10 ENGLISH

11. Keep handles dry, clean, and free from oil and

grease. Greasy, oily handles are slippery causing

loss of control.

12. Cut wood only. Do not use chain saw for pur-

poses not intended.Forexample:donotuse

chain saw for cutting plastic, masonry or non-

wood building materials. Use of the chain saw for

operations different than intended could result in a

hazardous situation.

13. Causes and operator prevention of kickback:

Kickback may occur when the nose or tip of the

guidebartouchesanobject,orwhenthewood

closes in and pinches the saw chain in the cut.

Tip contact in some cases may cause a sudden

reverse reaction, kicking the guide bar up and

back towards the operator. Pinching the saw chain

along the top of the guide bar may push the guide

barrapidlybacktowardstheoperator.Eitherof

these reactions may cause you to lose control of

the saw which could result in serious personal

injury.Donotrelyexclusivelyuponthesafety

devicesbuiltintoyoursaw.Asachainsawuser,

you should take several steps to keep your cutting

jobsfreefromaccidentorinjury.

Kickback is the result of tool misuse and/or incor-

rect operating procedures or conditions and can be

avoidedbytakingproperprecautionsasgivenbelow:

• Maintainarmgrip,withthumbsandngers

encircling the chain saw handles, with both

hands on the saw and position your body

and arm to allow you to resist kickback

forces. Kickback forces can be controlled by

the operator, if proper precautions are taken.

Do not let go of the chain saw.

►Fig.1

• Donotoverreachanddonotcutabove

shoulder height. This helps prevent unin-

tended tip contact and enables better control

of the chain saw in unexpected situations.

• Onlyusereplacementbarsandchainsspec-

iedbythemanufacturer.Incorrectreplace-

ment bars and chains may cause chain

breakage and/or kickback.

• Followthemanufacturer’ssharpeningand

maintenance instructions for the saw chain.

Decreasing the depth gauge height can lead

to increased kickback.

14. Before starting work, check that the chain

saw is in proper working order and that its

condition complies with the safety regulations.

Check in particular that:

• Thechainbrakeisworkingproperly;

• Therun-downbrakeisworkingproperly;

• Thebarandthesprocketcoveraretted

correctly;

• Thechainhasbeensharpenedandten-

sioned in accordance with the regulations.

15. Do not start the chain saw with the chain cover

being installed on it. Starting the chain saw with

the chain cover being installed on it may cause

the chain cover to thrown out forward resulting in

personalinjuryanddamagetoobjectsaroundthe

operator.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product. MISUSE or failure to follow the safety

rules stated in this instruction manual may cause

serious personal injury.

Important safety instructions for

battery cartridge

Before using battery cartridge, read all instructions

and cautionary markings on (1) battery charger, (2)

battery, and (3) product using battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them

out with clear water and seek medical atten-

tion right away. It may result in loss of your

eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any con-

ductive material.

(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water

or rain.

A battery short can cause a large current

ow, overheating, possible burns and even a

breakdown.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50 °C (122 °F).

7. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn

out. The battery cartridge can explode in a re.

8. Be careful not to drop or strike battery.

9. Do not use a damaged battery.

10.

The contained lithium-ion batteries are subject to

the Dangerous Goods Legislation requirements.

For commercial transports e.g. by third parties,

forwarding agents, special requirement on pack-

aging and labeling must be observed.

For preparation of the item being shipped, consult-

ing an expert for hazardous material is required.

Please also observe possibly more detailed

national regulations.

Tape or mask off open contacts and pack up the

battery in such a manner that it cannot move

around in the packaging.

11. Follow your local regulations relating to dis-

posal of battery.

SAVE THESE INSTRUCTIONS.

CAUTION: Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that

have been altered, may result in the battery bursting

causingres,personalinjuryanddamage.Itwill

also void the Makita warranty for the Makita tool and

charger.

Makita DUC353 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info