Bedienungsanleitung Makita DUC405 (Seite 18 von 128) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

695760

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

18 ENGLISH

TROUBLESHOOTING

Beforeaskingforrepairs,conductyourowninspectionrst.Ifyoundaproblemthatisnotexplainedinthemanual,

do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace-

ment parts for repairs.

Malfunction status Cause Action

The chain saw does not start. Two battery cartridges are not installed. Install two charged battery cartridges.

Battery problem (low voltage). Recharge the battery cartridges. If recharg-

ing is not effective, replace the battery

cartridge.

Main power switch is off. The chain saw is automatically turned off if

it is un-operated for a certain period. Turn

on the main power switch again.

The saw chain does not run. Chain brake activated. Release chain brake.

The motor stops running after a little use. Battery's charge level is low. Recharge the battery cartridges. If recharg-

ing is not effective, replace the battery

cartridge.

No oil on the chain. Oil tank is empty. Fill the oil tank.

Oil guide groove is dirty. Clean the groove.

Poor oil delivery. Adjusttheamountofoildeliverywiththe

adjustingscrew.

The chain saw does not reach maximum

RPM.

Battery cartridge is installed improperly. Install the battery cartridges as described

in this manual.

Battery power is dropping. Recharge the battery cartridges. If recharg-

ing is not effective, replace the battery

cartridge.

The drive system does not work correctly. Ask the authorized service center in your

region for repair.

The main power lamp is blinking. Switch trigger is pulled under an unoperat-

able condition.

Pull the switch trigger after the main power

switch is turned on and the chain brake is

released.

Chain does not stop even the chain brake

is activated:

Stop the machine immediately!

The brake band is worn down. Ask the authorized service center in your

region for repair.

Abnormal vibration:

Stop the machine immediately!

Loose guide bar or saw chain. Adjusttheguidebarandsawchain

tension.

Tool malfunction. Ask the authorized service center in your

region for repair.

OPTIONAL

ACCESSORIES

CAUTION: These accessories or attachments

are recommended for use with your Makita tool

specied in this manual. The use of any other

accessories or attachments might present a risk of

injurytopersons.Onlyuseaccessoryorattachment

for its stated purpose.

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service

Center.

• Saw chain

• Guide bar

• Guide bar cover

• File

• Tool bag

• Makita genuine battery and charger

WARNING: If you purchase a guide bar of

different length from the standard guide bar, also

purchase a suitable guide bar cover together. It

must t and fully cover the guide bar on the chain

saw.

NOTE: Some items in the list may be included in the

tool package as standard accessories. They may

differ from country to country.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DUC405 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info