Bedienungsanleitung Makita DUR181RT (Seite 11 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

711145

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Indicating the remaining battery capacity

Only for battery cartridges with the indicator (Fig. 7)

Press the check button on the battery cartridge to indicate

the remaining battery capacity. The indicator lamps light

up for a few seconds.

015658

NOTE:

• Depending on the conditions of use and the ambient

temperature, the indication may differ slightly from the

actual capacity.

Power switch action

WARNING:

• Before inserting the battery cartridge in the tool,

always check to see that the switch trigger

actuates properly and returns to the “OFF”

position when released. Do not pull the switch

trigger hard without pressing in the lock-off button.

This can cause switch breakage. Operating a tool

with a switch that does not actuate properly can lead to

loss of control and serious personal injury.

To prevent the switch trigger from being accidentally

pulled, a lock-off button is provided.

To start the tool, move the lock-off button forward and pull

the switch trigger. Release the switch trigger to stop.

(Fig. 8)

Indication lamp (Fig. 9)

Running the tool allows the indication lamp to show the

battery cartridge capacity status.

When the tool is also overloaded and has stopped during

operation, the lamp lights up in red.

Refer to the following table for the status and action to be

taken for the indication lamp.

Note 1: The time at which the indication lamp lights up varies by the temperature around the work area and the battery

cartridge conditions.

012443

Adjusting the shaft length

WARNING:

• Before adjusting the shaft length, release the switch

trigger and remove the battery cartridge from the string

trimmer. Failure to release the trigger and removing the

battery cartridge may cause a personal injury.

To adjust the length of the shaft, turn the grip

counterclockwise until the shaft is unlocked and pull out or

push in to the desired length. (Fig. 10)

Nylon cutting head

NOTICE:

• The bump feed will not operate properly if the nylon

cutting head is not rotating.

The nylon cutting head is a single string trimmer head

provided with a bump & feed mechanism.

To cause the nylon cord to feed out, the cutting head

should be bumped against the ground while the tool is

running. As the nylon cord is feeding out it will

automatically be cut to the proper length by the cutter on

the guard. (Fig. 11)

NOTE:

• If the nylon cord does not feed out while bumping the

head, rewind/replace the nylon cord by following the

procedures described under “Installing or removing the

nylon cutting head” and “Winding a new nylon cord on

the spool.”

• Do not bump the tool to the concrete or asphalt

surface. Bumping to this kind of objects may cause the

tool damage.

ASSEMBLY

WARNING:

• Always be sure that the tool is switched off and

battery cartridge is removed before carrying out

any work on the tool. Failure to switch off and remove

Indicator lamps

Remaining

capacity

Lighted Off Blinking

75% to 100%

50% to 75%

25% to 50%

0% to 25%

Charge the

battery.

The battery may

have

malfunctioned.

Indication lamp Status Action to be taken

The lamp blinks in red. This indicates the appropriate time to

replace the battery cartridge when the

battery power becomes low.

Recharge the battery cartridge as soon

as possible.

The lamp lights up in red.

(Note 1)

This function works when the battery

power is almost used up. At this time,

tool stops immediately.

Recharge the battery cartridge.

The lamp lights up in red.

(Note 1)

Autostop due to overload. Turn off the tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DUR181RT Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info