Bedienungsanleitung Makita DVC863L (Seite 7 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691506

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

7 ENGLISH

Noise

The typical A-weighted noise level determined accord-

ing to 60335-2-69:

Model DVC862L

Sound pressure level (L

) : 70 dB(A) or less

Uncertainty (K) : 2.5 dB(A)

Model DVC863L

Sound pressure level (L

) : 70 dB(A) or less

Uncertainty (K) : 2.5 dB(A)

The noise level under working may exceed 80 dB (A).

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to 60335-2-69:

Vibration emission (a

h,M

) : 2.5 m/s

or less

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE: The declared vibration emission value

may also be used in a preliminary assessment of

exposure.

WARNING: The vibration emission during actual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

SAFETY WARNINGS

Cordless vacuum cleaner safety

warnings

WARNING: IMPORTANT! READ CAREFULLY

all safety warnings and all instructions BEFORE

USE . Failure to follow the warnings and instructions

may result in electric shock, re and/or serious injury.

1. Before use, make sure that this cleaner must

be used by people who have been adequately

instructed on the use of this cleaner.

2. If foam/liquid comes out, switch off

immediately.

3. Clean the water level limiting device regularly

and examine it for signs of damage.

4. Do not use the cleaner without the lter.

Replace a damaged lter immediately.

5. AVOID UNINTENTIONAL STARTING. Be sure

switch is OFF when installing battery(ies).

6. Do not attempt to pick up ammable materials,

re works, lighted cigarettes, hot ashes, hot

metal chips, sharp materials such as razors,

needles, broken glass or the like.

7. NEVER USE THE CLEANER IN THE VICINITY

OF GASOLINE, GAS, PAINT, ADHESIVES OR

OTHER HIGHLY EXPLOSIVE SUBSTANCES.

The switch emits sparks when turned ON and

OFF. And so does the motor commutator during

operation. A dangerous explosion may result.

Never vacuum up toxic, carcinogenic, com-

bustible or other hazardous materials such as

asbestos, arsenic, barium, beryllium, lead, pes-

ticides, or other health endangering materials.

9. Never use the cleaner outdoors in the rain.

10. Do not use close to heat sources (stoves, etc.).

11. Do not block cooling vents. These vents per-

mit cooling of the motor. Blockage should be

carefully avoided otherwise the motor will burn

out from lack of ventilation.

12. Keep proper footing and balance at all times.

13. Do not fold, tug or step on the hose.

14. Stop the cleaner immediately if you notice

poor performance or anything abnormal

during operation.

15.

REMOVE THE BATTERY(IES). When not in use,

before servicing, and when changing accessories.

16.

Clean and service the cleaner immediately after

each use to keep it in tiptop operating condition.

17. MAINTAIN THE CLEANER WITH CARE. Keep

the cleaner clean for better and safer per-

formance. Follow instructions for changing

accessories. Keep handles dry, clean, and free

from oil and grease.

18. CHECK DAMAGED PARTS. Before further use

of the cleaner, a guard or other part that is

damaged should be carefully checked to deter-

mine that it will operate properly and perform

its intended function. Check for alignment of

moving parts, binding of moving parts, break-

age of parts, mounting, and any other condi-

tions that may affect its operation. A guard or

other part that is damaged should be properly

repaired or replaced by an authorized service

center unless otherwise indicated elsewhere

in this instruction manual. Have defective

switches replaced by authorized service cen-

ter. Don’t use the cleaner if switch does not

turn it on and off.

19. REPLACEMENT PARTS. When servicing, use

only identical replacement parts.

20. STORE IDLE CLEANER. When not in use, the

cleaner should be stored indoors.

21.

Be kind to your cleaner. Rough handling can cause

breakage of even the most sturdily built cleaner.

22. Do not attempt to clean the exterior or interior

with benzine, thinner or cleaning chemicals.

Cracks and discoloration may be caused.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DVC863L Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info