Bedienungsanleitung Makita DVC864L (Seite 8 von 128) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691507

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

8 ENGLISH

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material! In observance of the

European Directives, on Waste Electric

and Electronic Equipment and Batteries

and Accumulators and Waste Batteries and

Accumulators and their implementation

in accordance with national laws, electric

equipment and batteries and battery

pack(s) that have reached the end of

their life must be collected separately and

returned to an environmentally compatible

recycling facility.

Intended use

The tool is intended for collecting dry dust. The tool

is suitable for commercial use, for example in hotels,

schools, hospitals, factories, shops, ofces and rental

businesses.

Noise

The typical A-weighted noise level determined accord-

ing to EN60335:

Sound pressure level (L

) : 70 dB(A) or less

Uncertainty (K) : 2.5 dB(A)

The noise level under working may exceed 80 dB (A).

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN60335:

Vibration emission (a

h,M

) : 2.5 m/s

or less

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE: The declared vibration emission value

may also be used in a preliminary assessment of

exposure.

WARNING: The vibration emission during actual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

SAFETY WARNINGS

Cordless vacuum cleaner safety

warnings

WARNING: IMPORTANT! READ CAREFULLY

all safety warnings and all instructions BEFORE

USE. Failure to follow the warnings and instructions

may result in electric shock, re and/or serious injury.

1. Before use, make sure that this cleaner must

be used by people who have been adequately

instructed on the use of this cleaner.

2. Do not use the cleaner without the lter.

Replace a damaged lter immediately.

3. AVOID UNINTENTIONAL STARTING. Be sure

switch is OFF when installing battery (ies).

4. Do not attempt to pick up ammable materials,

re works, lighted cigarettes, hot ashes, hot

metal chips, sharp materials such as razors,

needles, broken glass or the like.

5. NEVER USE THE CLEANER IN THE VICINITY

OF GASOLINE, GAS, PAINT, ADHESIVES OR

OTHER HIGHLY EXPLOSIVE SUBSTANCES.

The switch emits sparks when turned ON and

OFF. And so does the motor commutator during

operation. A dangerous explosion may result.

Never vacuum up toxic, carcinogenic, com-

bustible or other hazardous materials such as

asbestos, arsenic, barium, beryllium, lead, pes-

ticides, or other health endangering materials.

7. Never use the cleaner outdoors in the rain.

8. Do not use close to heat sources (stoves, etc.).

9. Do not block cooling vents. These vents per-

mit cooling of the motor. Blockage should be

carefully avoided otherwise the motor will burn

out from lack of ventilation.

10. Keep proper footing and balance at all times.

11. Do not fold, tug or step on the hose.

12. Stop the cleaner immediately if you notice

poor performance or anything abnormal

during operation.

13. REMOVE THE BATTERY(IES). When not in

use, before servicing, and when changing

accessories.

14. Clean and service the cleaner immediately

after each use to keep it in tiptop operating

condition.

15. MAINTAIN THE CLEANER WITH CARE. Keep

the cleaner clean for better and safer per-

formance. Follow instructions for changing

accessories. Keep handles dry, clean, and free

from oil and grease.

16.

CHECK DAMAGED PARTS. Before further use

of the cleaner, a guard or other part that is dam-

aged should be carefully checked to determine

that it will operate properly and perform its

intended function. Check for alignment of mov-

ing parts, binding of moving parts, breakage of

parts, mounting, and any other conditions that

may affect its operation. A guard or other part

that is damaged should be properly repaired or

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DVC864L Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info