Bedienungsanleitung Makita EA3601F (Seite 8 von 54) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

690911

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Transport and storage

• When changing your location during work switch off the chain saw and

actuate the chain brake in order to prevent an inadvertent start of the chain.

• Never carry or transport the chain saw with the chain running. When the

saw is hot, do not cover it (with a tarp, blanket, newspaper or the like). Let

the saw cool down before putting it in a storage case or vehicle. Saws with

catalytic converter take longer to cool down!

• Use the chain protection cover during transport and storage.

• Carry the chain saw with the front handle. The guide bar points backwards. Avoid

coming in contact with the mufer (danger of burns).

• Ensure safe positioning of the chain saw during car transportation to avoid fuel

leakage, damage or injury.

• Store the chain saw safely in a dry place. It must not be stored outdoors. Keep

the chain saw away from children.

• Before storing the chain saw over a long period of time or shipping it, the fuel and

oil tanks must be completely emptied.

• Perform cleaning and maintenance before storage.

Maintenance

• Before performing maintenance work switch off the chain saw and pull out

the plug cap.

• Before starting work always check the operating safety of the chain saw, in

particular the function of the chain brake. Make sure that the chain is always

sharpened and tightened correctly.

• Operate the chain saw only at a low noise and emission level. For this ensure the

carburetor is adjusted correctly.

• Regularly clean the chain saw.

• Regularly check the tank cap for tightness.

• Observe the accident prevention instructions issued by trade associations

and insurance companies.

• Do not perform any modications on the chain saw. You will put your safety

at risk.

• Perform only the maintenance and repair works described in the instruction

manual. All other work must be carried out by Makita Service.

• Use only original Makita spare parts and accessories.

• Using spare parts other than original Makita parts or accessories and guide

bar/chain combinations or lengths which are not approved bring a high risk

of accidents. We cannot accept any responsibility for accidents and damage

resulting from using sawing devices or accessories which have not been

approved.

Vibration

Individuals with poor circulation who are exposed to excessive vibration may

experience injury to blood vessels or the nervous system.

Vibration may cause the following symptoms to occur in the ngers, hands or wrists:

“Falling asleep” (numbness), tingling, pain, stabbing sensation, alteration of skin

color or of the skin.

If any of these symptoms occur, see a physician! To reduce the risk of

vibration white nger, keep your hands warm, wear gloves, and make sure the

saw chain is sharp.

First Aid

In case of accident make sure that a rst-aid box is available in the vicinity of the

cutting operations. Immediately replace any item taken from the rst aid box.

When asking for help, please give the following information:

- Place of accident

- What happened

- Number of injured persons

- Kind of injuries

- Your name

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita EA3601F Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info