Bedienungsanleitung Makita EG4550A (Seite 20 von 112) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

599871

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Handle Installation (Fig. 24)

1. Remove the two lugs in the pushrod inserted into the

rack, and line up the hole on the pushrod with the hole

on the rack. Next, insert the pushrod into the rack from

the outside and then screw in the M8 flange bolt on

the inside and tighten down the bolt.

TORQUE: 17 - 22 lbf•ft (24 - 29 N•m, 2.4 - 3.0 kgf•m)

Wheel Kit Installation (Fig. 25)

1. Line up the hole on the roller with the hole on the rack,

insert the roller shaft into the rack from the outside,

and then screw in the M8 flange bolt on the inside and

tighten down the bolt.

TORQUE: 17 - 22 lbf•ft (24 - 29 N•m, 2.4 - 3.0 kgf•m)

Fit the front stand (Fig. 26)

1. Insert an M8×100 bolt into the holes on the rubber

blanket, front stand, and rack mounting plate.

2. Screw the M8 flange bolt onto the M8×100 bolt from

the mounting plate and then tighten down the bolt.

Stopping the engine with remote control

1. Press the stop button.

2. Turn the engine switch on the generator to the

“O (OFF)” position.

3. Turn the fuel valve lever on the generator to the

“O (OFF)” position.

Battery Tray (Fig. 27)

NOTE:

Battery is not included. Use a battery (rating: 12V-10Ah,

L x W x H: maximum 160 mm x 90 mm x 160 mm)

available in the market.

1. Connect the black power line (ground electrode) on

the electric generator to the negative electrode on the

battery and the red power line to the positive electrode

on the battery.

2. Place the battery connected to the power lines into the

battery box on the rack.

3. Hang each of the two card buckles on the rubber belt

onto one of the two hangers on the battery box.

WARNING:

Lead and lead compounds are used in battery posts,

terminals, and related accessories. Always wash

hands after handling.

Engine Oil (Fig. 13)

The generator is shipped WITHOUT OIL in the engine.

Place the generator on a stable and level surface. Add

enough of the recommended oil to bring the oil level to the

top of the oil filler neck.

Use a 4-stroke motor oil that satisfies the requirements for

API service category SJ or later (or equivalent).

Do not overfill the engine with oil. If the engine is

overfilled, the excess oil may get transferred to the air

cleaner housing and air filter.

WARRANTY SERVICE

INFORMATION

CUSTOMER SERVICE INFORMATION

The personnel at the servicing dealership are trained

professionals. They should be able to answer most

questions you may have. If there is a problem that your

dealer does not solve to your satisfaction, please discuss

it with the Service Manager or General Manager of the

dealership. Almost all problems are solved in this way.

If you are dissatisfied with the decision made by the

dealership’s management, contact the Makita

Corporation.

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine: Petrol Generator

Model No./ Type: EG2250A, EG2850A, EG4550A,

EG5550A, EG6050A

Specifications: see "SPECIFICATIONS" table.

are of series production and

Conforms to the following European Directives:

2000/14/EC, 2004/108/EC, 2006/42/EC,

2006/95/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN12601, EN55012, EN61000, EN60204-1

The technical documentation is kept by:

Makita International Europe Ltd.

Technical Department,

Michigan Drive, Tongwell,

Milton Keynes, Bucks MK15 8JD, England

The conformity assessment procedure required by

Directive 2000/14/EC was in Accordance with annex VI.

Notified Body:

AV TECHNOLOGY LTD

AVTECH House,Arkle Avenue

Stanley Green Trading Estate

Handforth,Cheshire

SK9 3RW,United Kingdom

Identification number 1067

Model EG2250A

Measured Sound Power Level: 94 dB (A)

Guaranteed Sound Power Level: 95 dB (A)

Model EG2850A, EG4550A, EG5550A, EG6050A

Measured Sound Power Level: 95 dB (A)

Guaranteed Sound Power Level: 96 dB (A)

27.12.2013

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, 446-8502, JAPAN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita EG4550A Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info