Bedienungsanleitung Makita EH7500W (Seite 10 von 30) (Englisch, Holländisch)

448395

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Refuelling

- The engine must be switched off.

- Stop the engine during refuelling, keep away from ames and do not smoke.

- Take care not to spill either fuel or oil in order to prevent soil contamination.

Clean the hedge trimmer immediately after fuel has been spilled.

- Do not spill fuel onto the engine. Wipe down if the fuel is spilled.

- Avoid any fuel contact with your clothes. Change your clothes instantly if fuel has

been spilled on it (to prevent clothes catching re).

- Inspect the fuel cap regularly making sure that it can be securely fastened and

does not leak the fuel.

- Carefully tighten the fuel tank cap. Change location to start the engine (at least

3 meters away from the place of refuelling.)

- Never refuel in closed rooms. Fuel vapors accumulate at ground level. (Risk of

explosions.)

- Transport and store fuel only in approved containers. Make sure the fuel stored is

not accessible to children.

- Thoroughly clean the area around the tank cap to prevent dirt from getting into

the fuel tank.

- Unscrew the plug and ll the tank with fuel. Use a gauze funnel to lter the fuel.

- Tightly screw on the plug by hand only.

- Clean around the screw plug and the tank after refuelling.

- Always wipe up any spilled fuel to prevent a re.

Storage of fuel

- Fuel cannot be stored for an unlimited period of time.

- Purchase only the quantity required for a 4 week operation period.

- Use approved fuel storage containers only.

- Make sure that there are no children or other people within a working range of

15 meters. Also pay attention to any animal in the working vicinity.

- Before use always check that the hedge trimmer is safe for operation. Check the

cutting device is not damaged, the control lever for easy action and check for the

proper function of the I-O switch.

Make sure that the cutting blades do not run when the engine is idling.

Check with your dealer for adjustment if in doubt. Check for clean and dry

handles and test function of the I-O switch.

- Start the hedge trimmer only in accordance with the instructions. Do not use any

other methods for starting the engine. (See Starting)

- Start the engine only after the entire assembly is done. Operation of the engine is

only permitted after all the appropriate accessories are attached. Otherwise there

is a risk of injury.

- Before starting, make sure that the cutting blades have no contact with objects

such as branches, stones, etc.

- Before trimming, inspect the area for wires, cords, glass, or other foreign objects

which could come in contact with the blade.

- Electrical shock. Be aware of any and all electric lines and electric fences. Check

all areas for electrical lines before cutting.

PRECAUTIONS BEFORE STARTING

3 meters

(10 feet)

Diagrammatic

gure

15 meters

(50 feet)

360°

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita EH7500W Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita EH7500W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info