Bedienungsanleitung Makita EK8100 (Seite 10 von 68) (Englisch, Französisch)

599881

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

In wet cutting, the disc is wetted at an equal rate on both sides by

a trickle of water. MAKITA offers the right accessories for all wet

cutting applications (see also "SPECIAL ACCESSORIES").

- Remove foreign objects such as sand, stones and nails found

within the working area. Caution: Watch out for electric wires

and cables!

The rapid rotation of the cutting disc at the point of contact

throws fragments out of the cut groove at high speed. For

your safety, swing the protection hood down as far as pos-

sible (23), so that material fragments are thrown forward,

away from the operator.

- Mark the cut, and then make a groove about 5 mm (just under

1/5") along the entire length of the planned cut. This groove will

then guide the Power Cut accurately guring the actual cutoff.

NOTE:

For long, straight cuts we recommend using a trolley (24, see

also "SPECIAL ACCESSORIES"). This makes it much easier to

guide the unit straight.

- Perform the cut with a steady back-and-forth motion.

- When cutting slabs to size, you need not cut through the entire

material thickness (creating unnecessary dust). Instead, simply

make a shallow groove, and then knock off the excess material

cleanly on a at surface (25).

CAREFUL!

When cutting into lengths, cutting through material, making cutouts,

etc., always make sure to plan the direction and sequence of cuts

in such a way that the disc does not get jammed by the cut-off

piece, and that no persons can be injured by falling pieces.

Transport and storage

- Always turn off the Power Cut when transporting it or

moving it from place to place on a site (26).

Never carry or move the unit with the engine on or the

disc moving!

- Carry the unit only by the tubular (middle) handle with the cut

ting disc pointing behind you (26). Avoid touching the exhaust

mufer (burn hazard!)

- When moving the Power Cut over longer distances, use a

wheelbarrow or wagon.

- When transporting the Power Cut in a vehicle, make sure it is

securely positioned in such a way that no fuel can leak out.

Always remove the cutting disc before transporting the unit in

a vehicle. Before transporting in a vehicle, allow the Power Cut

to cool off completely. Note: Mufers with catalytic converters

take longer to cool off!

- The Power Cut should be stored safely in a dry place. It must

not be left outdoors! Always dismount the cutting disc before

storage. Keep the Power Cut away from children.

- Before long-term storage and before shipping the Power

Cut, follow the instructions in the chapter on "Periodic

care and maintenance". ALWAYS empty the fuel tank and

run the carburetor dry.

- When putting cutting discs in storage, be careful to:

•

Clean and dry them well. CAUTION: Do NOT clean synthetic

resin cutting discs with water or other uids!

•

Store them lying down at.

•

Avoid dampness, freezing temperatures, direct sunshine,

high temperatures and temperature uctuations, as these

can cause breakage and splintering.

•

Before re-using a resin cutting disc, make sure of the use-by

(expiration) date (quarter and year, stamped on the arbor

ring). If this date has been exceeded, do NOT use the cutting

disc.

Always check new cutting discs or cutting discs that have

been in storage to make sure that they are free of defects

and before the rst cut test-run the tool at top speed for at

least 60 seconds. Keep body parts and people well away out

of range of the direction of the cutting disc during this test.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita EK8100 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita EK8100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info