Bedienungsanleitung Makita ELM4621 (Seite 13 von 252) (Alle Sprachen)

690893

Zoom out

Zoom in

Vorherige Seite

1/252

Nächste Seite

13 ENGLISH

37. Be careful during adjustment of the mower

to prevent entrapment of the ngers between

moving blades and xed parts of the mower.

38. Mow across the face of slopes, never up and

down. Exercise extreme caution when chang-

ing direction on slopes. Do not mow exces-

sively steep slopes.

39. Do not wash with a hose; avoid getting water

in motor and electrical connections.

40. Check the blade mounting bolt at frequent

intervals for proper tightness.

41. Keep all nuts, bolts, and screws tight to

be sure the equipment is in safe working

condition.

42. Take care as rotating one blade can cause

other blades to rotate.

43. Always allow the mower to cool down before

storing.

44. When servicing the blades be aware that, even

though the power source is switched off, the

blades can still be moved.

45. Replace worn or damaged parts for safety.

Use only genuine replacement parts and

accessories.

46. Have your power tool serviced by a qualied

repair person using only identical replacement

parts.Thiswillensurethatthesafetyofthepower

tool is maintained.

47. Follow instruction for lubricating and chang-

ing accessories.

48. Keep handles dry, clean and free from oil and

grease.

49. Check to make sure that the voltage and fre-

quency of the power supply correspond to the

specications given on the identication plate.

We recommend the use of a residual-current-op-

erated circuit breaker (ground-fault circuit inter-

rupter) with a tripping current of 30 mA or less, or

an earth leakage current protector.

50. This machine can be used by children aged

from 8 years and above and persons with

reduced physical, sensory or mental capabil-

ities or lack of experience and knowledge if

they have been given supervision or instruc-

tion concerning use of the machine in a safe

way and understand the hazards involved.

Cleaning and user maintenance shall not be

made by children without supervision.

Residual risks

Evenifyouareoperatingthisproductinaccordance

withallthesafetyrequirements,potentialrisksofinjury

anddamageremain.Thefollowingdangerscanarisein

connection with the structure and design of this product.

1. Healthdefectsresultingfromvibrationemission

iftheproductisbeingusedoverlongperiodsof

timeornotadequatelymanagedandproperly

maintained.

2. Injuriesanddamagetopropertyduetobroken

application tools or the sudden impact of hidden

objectsduringuse.

3. Dangerofinjuryandpropertydamagecausedby

yingobjects.

WARNING: This product produces an elec-

tromagnetic eld during operation. This eld may

under some circumstances interfere with active

or passive medical implants. To reduce the risk

of serious or fatal injury, we recommend persons

with medical implants to consult their doctor and

the medical implant manufacturer before operat-

ing this product.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product.

MISUSE or failure to follow the safety rules stated

in this instruction manual may cause serious

personal injury.

ASSEMBLY

CAUTION: Always be sure that the tool is

switched off and unplugged before carrying out

any work on the tool.

Assembling the handle

1. Unload the upper handle from the main unit of the

machine.

►Fig.1: 1. Upper handle

2. Loosen the thumb nuts.

►Fig.2: 1.Thumbnut

3. Widen the handle outside a little, then raise the

handle, then insert the protrusions of the handle into the

holes, and then tighten the thumb nuts.

►Fig.3: 1. Handle 2. Protrusion 3. Hole 4.Thumbnut

4. Attachtheupperhandlebyinsertingthelevers

from the outside of the handle, and then tighten the nuts

with the wrench to secure the handle.

►Fig.4: 1.Lever2. Nut

5. Secure the cords with the clamps as shown in the

gure.

►Fig.5: 1. Clamp

Installing the grass basket

1. Attach the pipes of the grass basket to the frame.

►Fig.6: 1. Pipe 2. Frame

2. Opentherearcover.

►Fig.7: 1.Rearcover

3. Insert the grass basket from the front side through

the inside of the handle, and then hook the grass basket

onto the rear side of the machine.

►Fig.8: 1. Grass basket

►Fig.9

Toremovethegrassbasket,performtheinstallation

procedureinreverse.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita ELM4621 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info