Bedienungsanleitung Makita EM2651LH (Seite 5 von 48) (Englisch, Holländisch)

448399

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Start the Petrol Brushcutter only in accordance with the instructions.

– Do not use any other methods for starting the engine!

– Use the Petrol Brushcutter and the tools only for such applications as

specied.

– Only start the Petrol Brushcutter engine, after the entire assembly is done.

Operation of the device is only permitted after all the appropriate accessories

are attached!

– Before starting make sure that the cutting tool has no contact with hard

objects such as branches, stones etc. as the cutting tool will revolve when

starting.

– The engine is to be switched off immediately in case of any engine problems.

– Should the cutting tool hit stones or other hard objects, immediately switch off

the engine and inspect the cutting tool.

– Inspect the cutting tool at short regular intervals for damage (detection of

hairline cracks by means of tapping-noise test).

– Operate the Petrol Brushcutter only with the shoulder strap attached which is

to be suitably adjusted before putting the Petrol Brushcutter into operation. It

is essential to adjust the shoulder strap according to the user size to prevent

fatigue occurring during use. Never hold the cutter with one hand during use.

– During operation always hold the Petrol Brushcutter with both hands.

Always ensure a safe footing.

– Operate the Petrol Brushcutter in such a manner as to avoid inhalation of

the exhaust gases. Never run the engine in enclosed rooms (risk of gas

poisoning). Carbon monoxide is an odorless gas.

– Switch off the engine when resting and when leaving the Petrol Brushcutter

unattended, and place it in a safe location to prevent danger to others or

damage to the machine.

– Never put the hot Petrol Brushcutter onto dry grass or onto any combustible

materials.

– The cutting tool has to be equipped with it appropriate guard.

Never run the cutter without this guard!

– All protective installations and guards supplied with the machine must be

used during operation.

– Never operate the engine with faulty exhaust mufer.

– Shut off the engine during transport.

– During transport over long distances the tool protection included with the

equipment must always be used.

– Ensure safe position of the Petrol Brushcutter during car transportation to

avoid fuel leakage.

– When transporting the Petrol Brushcutter, ensure that the fuel tank is

completely empty.

–

When unloading the Petrol Brushcutter from the truck, never drop the Engine

to the ground or this may severely damage the fuel tank.

–

Except in case of emergency, never drop or cast the Petrol Brushcutter to the

ground or this may severely damage the Petrol Brushcutter.

– Remember to lift the entire equipment from the ground when moving the

equipment. Dragging the fuel tank is highly dangerous and will cause damage

and leakage of fuel, possibly causing re.

Refuelling

– Shut off the engine during refuelling, keep away from open ames and do not

smoke.

– Avoid skin contact with mineral oil products. Do not inhale fuel vapor. Always

wear protective gloves during refuelling. Change and clean protective clothing

at regular intervals.

– Take care not to spill either fuel or oil in order to prevent soil contamination

(environmental protection). Clean the Petrol Brushcutter immediately after

fuel has been spilt.

– Avoid any fuel contact with your clothing. Change your clothing instantly if

fuel has been spilt on it (to prevent clothing catching re).

– Inspect the fuel cap at regular intervals making sure that it can be securely

fastened and does not leak.

– Carefully tighten the fuel tank cap. Change location to start the engine (at

least 3 meters away from the place of refuelling).

– Never refuel in closed rooms. Fuel vapors accumulate at ground lever (risk of

explosions).

– Only transport and store fuel in approved containers. Make sure the fuel

stored is not accessible to children.

• Resting

• Transport

• Refuelling

• Maintenance

• Tool replacement

3 meters

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita EM2651LH Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita EM2651LH

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info