Bedienungsanleitung Makita GN420C (Seite 5 von 72) (Deutsch, Englisch, Polnisch)

599701

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

ENG904-2

Vibration

The vibration total value determined according to

EN792:

Vibration emission (a

) : 3.5 m/s

Uncertainty (K) : 1.5 m/s

ENG901-1

•

The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH003-14

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Cordless Concrete Nailer

Model No./ Type: GN420C

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN792,EN60745

The technical documentation is kept by:

Makita International Europe Ltd.

Technical Department,

Michigan Drive, Tongwell,

Milton Keynes, Bucks MK15 8JD, England

29.03.2012

000230

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, 446-8502, JAPAN

GEA010-1

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for

future reference.

ENB111-4

Cordless nailer/stapler safety

warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in serious injury, electric shock

and/or fire.

Save all warnings and

instructions for future reference.

For personal safety and proper operation and

maintenance of the tool, read this instruction manual

before using the tool.

General safety

• Do not permit those uninstructed to use the tool.

• No horseplay. Respect the tool as a working

implement.

• Do not operate when under the influence of

alcohol, drugs or the like.

• Never alter the tool.

Personal protective equipments

• Always wear safety glasses to protect your eyes

from dust or fastener injury.

WARNING: It is an employer's responsibility to

enforce the use of safety eye protection equipment

by the tool operators and by other persons in the

immediate working area.

For Australia and New Zealand only

Always wear safety glasses and face shield to

protect your eyes from dust or fastener injury. The

safety glasses and the face shield should conform

with the requirements of AS/NZS 1336.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita GN420C Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info