Bedienungsanleitung Makita HP 2034 (Seite 5 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

448509

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISH

Explanation of general view

1 Grip base

2 Side grip (auxiliary handle)

3 Teeth

4 Protrusions

5 Loosen

6 Tighten

7 Bit

8 Chuck key

9 Sleeve

0 Ring

q Depth gauge

w Switch trigger

e Lock button

r Reversing switch lever

t Speed change knob

y Action mode change knob

u Blow-out bulb

i Vent holes

SPECIFICATIONS

Model HP2032 HP2033 HP2034

Max. capacities

Concrete ......................................................... High: 20 mm 20 mm 20 mm

Low: — — —

Steel ............................................................... High: 8 mm 8 mm 8 mm

Low: 13 mm 13 mm 13 mm

Wood .............................................................. High: 25 mm 25 mm 25 mm

Low: 40 mm 40 mm 40 mm

No load speed (RPM) ....................................... High: 0 – 2,900 0 – 2,900 2,900

Low: 0 – 850 0 – 850 850

Blows per minute .............................................. High: 0 – 32,000 0 – 32,000 32,000

Low: 0 – 9,400 0 – 9,400 9,400

Overall length ............................................................. 370 mm 368 mm 370 mm

Net weight ................................................................... 2.5 kg 2.5 kg 2.5 kg

•

Due to our continuing program of research and

development, the specifications herein are subject

to change without notice.

•

Note: Specifications may differ from country to

country.

Power supply

The machine should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

Safety hints

For your own safety, please refer to the enclosed

safety instructions.

ADDITIONAL SAFETY RULES

1. Wear a hard hat (safety helmet), safety glasses

and/or face shield. It is also highly recom-

mended that you wear a dust mask, ear pro-

tectors and thickly padded gloves.

2. Under normal operation, the machine is

designed to produce vibration. The screws

can come loose easily, causing a breakdown

or accident. Check tightness of screws care-

fully before operation.

3. Always be sure you have a firm footing. Be

sure no one is below when using the machine

in high locations.

4. Hold the machine firmly with both hands.

Always use the side grip.

5. Keep hands away from rotating parts.

6. Do not leave the machine running. Operate the

machine only when hand-held.

7. When drilling into walls, floors or wherever

‘‘live’’electrical wires may be encountered, DO

NOT TOUCH ANY METAL PARTS OF THE

MACHINE! Hold the machine only by the insu-

lated grasping surfaces to prevent electric

shock if you drill into a ‘‘live’’ wire.

8. Do not touch the bit or the workpiece immedi-

ately after operation; they may be extremely

hot and could burn your skin.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Important:

Always be sure that the machine is switched off and

unplugged before installing or removing the side grip,

bit or other accessories.

Side grip (auxiliary handle) (Fig. 1)

Always use the side grip to ensure operating safety.

Install the side grip so that the teeth on the grip fit in

between the protrusions on the machine barrel. Then

tighten the grip by turning clockwise at the desired

position. It may be swung 360° so as to be secured at

any position.

Installing or removing drill bit

For HP2032 and HP2034 (Fig. 2)

To install the bit, place it in the chuck as far as it will

go. Tighten the chuck by hand. Place the chuck key in

each of the three holes and tighten clockwise. Be sure

to tighten all three chuck holes evenly.

To remove the bit, turn the chuck key counterclock-

wise in just one hole, then loosen the chuck by hand.

After using the chuck key, be sure to return it to the

original position.

HP2032/HP2033 (E) (’99. 8. 20)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita HP 2034 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita HP 2034

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info