Bedienungsanleitung Makita HR1840 (Seite 5 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691027

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

5 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model: HR1840 HR1841F

Capacities Concrete 18 mm

Core bit 35 mm

Diamond core bit (dry type) 65 mm

Steel 13 mm

Wood 24 mm

No load speed 0 - 2,100 min

-1

Blows per minute 0 - 4,800 min

-1

Overall length 285 mm

Net weight 2.0 - 2.4 kg 2.0 - 2.5 kg

Safety class

/II

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydifferfromcountrytocountry.

• Theweightmaydifferdependingontheattachment(s).Thelightestandheaviestcombination,accordingto

EPTA-Procedure01/2014,areshowninthetable.

Intended use

Thetoolisintendedforhammerdrillinganddrillingin

brick, concrete and stone.

It is also suitable for drilling without impact in wood,

metal, ceramic and plastic.

Power supply

Thetoolshouldbeconnectedonlytoapowersupplyof

the same voltage as indicated on the nameplate, and

canonlybeoperatedonsingle-phaseACsupply.They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN60745:

Model HR1840

Sound pressure level (L

):87dB(A)

Sound power level (L

):98dB(A)

Uncertainty(K):3dB(A)

Model HR1841F

Sound pressure level (L

):87dB(A)

Sound power level (L

):98dB(A)

Uncertainty(K):3dB(A)

WARNING: Wear ear protection.

Vibration

Thevibrationtotalvalue(tri-axialvectorsum)deter-

mined according to EN60745:

Model HR1840

Work mode: hammer drilling into concrete

Vibration emission (a

h, HD

): 10.0 m/s

Uncertainty (K) : 1.5 m/s

Work mode: drilling into metal

Vibration emission (a

h,D

) : 3.0 m/s

Uncertainty (K) : 1.5 m/s

Model HR1841F

Work mode: hammer drilling into concrete

Vibration emission (a

h, HD

): 7.5 m/s

Uncertainty (K) : 1.5 m/s

Work mode: drilling into metal

Vibration emission (a

h,D

) : 3.0 m/s

Uncertainty (K) : 1.5 m/s

NOTE:Thedeclaredvibrationemissionvaluehas

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE:Thedeclaredvibrationemissionvalue

may also be used in a preliminary assessment of

exposure.

WARNING:Thevibrationemissionduringactual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tionofexposureintheactualconditionsofuse(taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita HR1840 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info