Bedienungsanleitung Makita HR1840 (Seite 6 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691027

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

6 ENGLISH

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specications provided with this

power tool. Failure to follow all instructions listed below

mayresultinelectricshock,reand/orseriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyourmains-oper-

ated (corded) power tool or battery-operated (cordless) power tool.

ROTARY HAMMER SAFETY WARNINGS

1. Wear ear protectors.Exposuretonoisecan

cause hearing loss.

2. Use auxiliary handle(s), if supplied with the

tool.Lossofcontrolcancausepersonalinjury.

Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord.Cuttingaccessorycontactinga"live"wiremay

makeexposedmetalpartsofthepowertool"live"

and could give the operator an electric shock.

Wear a hard hat (safety helmet), safety glasses and/

or face shield. Ordinary eye or sun glasses are NOT

safety glasses. It is also highly recommended that

you wear a dust mask and thickly padded gloves.

Be sure the bit is secured in place before operation.

Under normal operation, the tool is designed to

produce vibration. The screws can come loose

easily, causing a breakdown or accident. Check

tightness of screws carefully before operation.

In cold weather or when the tool has not been used for a

long time, let the tool warm up for a while by operating it

under no load. This will loosen up the lubrication. Without

proper warm-up, hammering operation is difcult.

Always be sure you have a rm footing. Be sure no

one is below when using the tool in high locations.

9. Hold the tool rmly with both hands.

10. Keep hands away from moving parts.

11. Do not leave the tool running. Operate the tool

only when hand-held.

12.

Do not point the tool at any one in the area when operat-

ing. The bit could y out and injure someone seriously.

13.

Do not touch the bit, parts close to the bit, or

workpiece immediately after operation; they

may be extremely hot and could burn your skin.

14.

Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation and

skin contact. Follow material supplier safety data.

15. Do not touch the power plug with wet hands.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with

product (gained from repeated use) replace strict adher-

ence to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this instruc-

tion manual may cause serious personal injury.

FUNCTIONAL

DESCRIPTION

CAUTION: Always be sure that the tool is

switched off and unplugged before adjusting or

checking function on the tool.

Switch action

CAUTION:

Before plugging in the tool, always

check to see that the switch trigger actuates properly

and returns to the "OFF" position when released.

CAUTION: Switch can be locked in “ON” posi-

tion for ease of operator comfort during extended

use. Apply caution when locking tool in “ON”

position and maintain rm grasp on tool.

►Fig.1: 1. Switch trigger 2. Lock button

Tostartthetool,simplypulltheswitchtrigger.Tool

speed is increased by increasing pressure on the switch

trigger. Release the switch trigger to stop.

For continuous operation, pull the switch trigger, push

in the lock button and then release the switch trigger.

Tostopthetoolfromthelockedposition,pulltheswitch

trigger fully, then release it.

Lighting up the front lamp

For HR1841F

►Fig.2: 1. Switch trigger 2. Lamp

CAUTION: Do not look in the light or see the

source of light directly.

Toturnonthelamp,pulltheswitchtrigger.Releasethe

switch trigger to turn it off.

NOTICE: Do not use thinner or gasoline to clean

the lamp. Such solvents may damage it.

NOTE: Use a dry cloth to wipe the dirt off the lens of

the lamp. Be careful not to scratch the lens of lamp, or

it may lower the illumination.

Reversing switch action

CAUTION: Always check the direction of

rotation before operation.

NOTICE:

Use the reversing switch only after the

tool comes to a complete stop. Changing the direction

of rotation before the tool stops may damage the tool.

NOTICE: If the switch trigger cannot be

depressed, check to see that the reversing switch

is fully set to position (A side) or (B side).

►Fig.3: 1. Reversing switch lever

Thistoolhasareversingswitchtochangethedirec-

tion of rotation. Move the reversing switch lever to the

position

(Aside)forclockwiserotationortotheposi-

tion (B side) for counterclockwise rotation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita HR1840 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info